Bell & Gossett Series HV three-piece bronze body booster pump for potable, domestic water. The Model HV BNFI is oil lubricated with a 1/6 HP, 1725 RPM, 115v single phase motor. Flanges available separately in 1" through 1-1/2" IPS.
The Bell & Gossett Model HV BNFI bronze body pump is used for pumping potable, domestic water from hot water heater tanks to bathrooms, kitchens and more. It is not typically used for standard, closed loop hot water heating sytems. The Series HV three-piece (motor, bearing assembly, volute) oil lubricated design provides for easy field service. The bearings, shaft and seal are all housed in an assembly which can be easily repaired or replaced. The B&G oil lubricated motor is the heart of the HV booster pump. Its mounting provides quiet, dependable service with minimum annual lubrication. The motor, coupled with its overall hydraulic performance, allows the Series HV pump to overcome system related noise caused by valves, fittings, or piping. A tube of Bell & Gossett oil along with flange gaskets and mounting hardware are included with the pump.