Radiator Valves
Select from such brands such as Danfoss, Honeywell-Braukmann, Taco, Macon Dunham-Bush (Mepco) and Hammond. Control the temperature in your radiators and baseboard convectors with these non-electric valves. Select from straight, angle-pattern and side-mount valves. Select operators (they attach to the valve) with or without remote sensors. Also, valves for One-Pipe Steam operation. Order the valve and operator separately.
-
SKU: DC1040
Danfoss tamper-proof non-electric built-in thermostat operator. Dial operator mounts to the valve and temperature sensor is also within. Temperature range of 45-86 degrees F.
Learn More
-
SKU: DC1020
Danfoss non-electric built-in thermostat operator. Dial operator mounts to the valve and temperature sensor is also within. Temperature range of 45-86 degrees F.
Learn More
-
SKU: DC1025
Danfoss non-electric remote wall mount thermostat operator. Cap and capillary mounts to the valve and remote wall dial and temperature sensor on a 6 foot capillary. Temperature range of 45-86 degrees F.
Learn More
-
SKU: DC1037
Danfoss non-electric remote wall mount thermostat operator. Cap and capillary mounts to the valve and 6 foot remote wall dial and remote temperature sensor on a 6 foot capillary. Temperature range of 45-86 degrees F.
Learn More
-
SKU: DC1030
Danfoss non-electric remote wall mount thermostat operator. Cap and capillary mounts to the valve and remote wall dial and temperature sensor on a 16 foot capillary. Temperature range of 45-86 degrees F.
Learn More
-
SKU: DC1060
Danfoss non-electric side mount angle valve. 3/4" female IP x 3/4" male union nut and nipple. The side mount valves are indended to be used with the built-in operators which contain the temperature sensor also. The inlet to outlet is in a angle pattern, but the sensor mounts off to the side of the valve to prevent ambient temperature rising up into the operator.
Learn More
-
SKU: DC1080
Danfoss non-electric angle valve. 1" female IP x 1" male union nut and nipple. The angle pattern valves are indended to be used with the remote operators which prevent ambient temperature rising up into the a built-in operators that contain the temperature sensor also.
Learn More
-
SKU: DC1075
Danfoss non-electric side mount angle valve. 1" female IP x 1" male union nut and nipple. The side mount valves are indended to be used with the built-in operators which contain the temperature sensor also. The inlet to outlet is in a angle pattern, but the sensor mounts off to the side of the valve to prevent ambient temperature rising up into the operator.
Learn More
-
SKU: DC1085
Danfoss non-electric straight through valve. 1" female IP x 1" male union nut and nipple. The straight pattern valves can be used with the remote operators or built-in operators, but when using the built-in operator turn the valve so that the sensor is on the side rather than the top to prevent ambient temperature rising up into the a built-in operators that contain the temperature sensor also.
Learn More
-
SKU: DC1095
Danfoss non-electric angle valve. 1-1/4" female IP x 1-1/4" male union nut and nipple. The angle pattern valves are indended to be used with the remote operators which prevent ambient temperature rising up into the a built-in operators that contain the temperature sensor also.
Learn More