Fabtek Aero 4530C5BC1S - 1-1/2 HP 45 GAL SS Condensate Pump

$8,736.93  / each
Out of stock
Ships within 10 business days
Fabtek Aero stainless steel condensate pumps are designed to collect condensate and return it to the boiler, usually via a boiler feed tank and pump unit. As condensate flows to the receiver tank, it fills with water. The float switch assembly then rises and signals the motor on the pump to start and begin pumping the condensate. When the float drops with the lower water level and breaks the contact on the switch, the pump will shut off. These compact, light-weight Fabtek Aero condensate units have tanks made from 12 gauge stainless steel with internal ribbing to add strength. The permanently-aligned pump is also made of stainless steel and is equipped with a seal cavity bleed line. The 4530C5CD1S has a 3/4" connection and a 1-1/2 HP, 3450 RPM, 115v single phase motor with a semi-open impeller. The 4530C5CD1S is a simplex unit, with a 45 gallon tank, capable of pumping 30 gallons per minute at 30 psi and 20,000 EDR.
More Information
BrandFabtek Aero
Unit DesignSimplex
Pump ConnectionThreaded
Pump Connection Size3/4"
Pump ClassCondensate
Discharge Pressure30 psi
Minimum GPM30 GPM
Equivalent Direct Radiation20,000 EDR
Motor HP1-1/2 HP
Motor Phase1 Ph
Motor Hertz60 Hz
Motor RPM3450 RPM
Motor Voltage115V
Max Temp230°F
Tank Size45 Gallon
ConstructionStainless Steel
Repair Parts
Alternate Items
Product Questions
Customer Questions
No Questions
Only logged in users can submit questions
Shipping & Returns
Shipping OptionsTime in Transit
Ground4-5 Business Days
3 Day3 Business Days
2 Day2 Business Days
1 Day1 Business Day

In-stock orders which qualify as small package shipping (typically weigh under 70 lbs. per shipment) ship the same day that the order is placed.

* Orders must be received before 3:00 PM Central Time

Purchased WithinRestock Fee
30 DaysNone
After 30 DaysDetermined Case by Case

Items returned within 30 days will not incur a restock fee if they are in saleable condition (original packaging and contents in excellent shape). Previously used/installed items cannot be returned, unless covered by warranty. All returns must be issued an RMA number.

Fabtek Aero Parts
Return to Top