BASO 120 VAC silicon carbide hot surface igniter with clip and fabric washer. This ignitor has a temperature range of 1800°F to 3100°F.

BASO 18" thermocouple with a 20-28 mV open circuit mV range for use with standing pilot ignition systems. K15DA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed.

BASO 24" thermocouple with a 20-28 mV open circuit mV range for use with standing pilot ignition systems. K15DA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed.

BASO 24" thermocouple with a 20-28 mV open circuit mV range for use with standing pilot ignition systems. K15DA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed.

BASO 36" snap-in thermocouple with a 20-28 mV open circuit mV range for use with standing pilot ignition systems. K15FA Series thermocouples are designed to be used where the pilot bracket accepts a fast and easy snap-in style clip to hold the thermocouple.

BASO 48" thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16BA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed (does not include split sleeve and nut).

BASO 24" high performance thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16BT Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed (includes split sleeve and nut).

BASO 30" high performance thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16BT Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed (includes split sleeve and nut).

BASO 36" high performance thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16BT Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed (includes split sleeve and nut).

BASO 36" nickel-plated thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16RA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed and has nickel plating added for applications where corrosion resistance is needed to extend the life of the thermocouple.

BASO 48" nickel-plated thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16RA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed and has nickel plating added for applications where corrosion resistance is needed to extend the life of the thermocouple.

BASO 72" nickel-plated thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16RA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed and has nickel plating added for applications where corrosion resistance is needed to extend the life of the thermocouple.

BASO 48" wholesale high performance thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16WT Series thermocouples are heavy duty larger gauge copper tubing for lower load currents to operate and includes an adapter that attaches to a male terminal connector.

BASO 60" wholesale high performance thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16WT Series thermocouples are heavy duty larger gauge copper tubing for lower load currents to operate and includes an adapter that attaches to a male terminal connector.

BASO 72" wholesale high performance thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems. K16WT Series thermocouples are heavy duty larger gauge copper tubing for lower load currents to operate and includes an adapter that attaches to a male terminal connector.

BASO 18" Super Slim Jim universal replacement thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems, includes two adapters and a spring clip.

BASO 24" Super Slim Jim universal replacement thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems, includes two adapters and a spring clip.

BASO 30" Super Slim Jim universal replacement thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems, includes two adapters and a spring clip.

BASO 36" Super Slim Jim universal replacement thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems, includes two adapters and a spring clip.

BASO 48" Super Slim Jim universal replacement thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems, includes two adapters and a spring clip.

BASO 72" Super Slim Jim universal replacement thermocouple with a 5-35 mV open circuit mV range for use with standing pilot ignition systems, includes two adapters and a spring clip.

BASO pilot switch with manual reset and SPST switching action for natural gas only. L62 Series pilot switches are for use on standing pilot equipment that require main burner shut-off when the pilot flame heating the thermocouple is extinguished.

BASO pilot switch with manual reset, 100% shut-off, and SPST switching action for natural gas or LP at pressures up to 0.5 psi. L62 Series pilot switches are for use on standing pilot equipment that require main burner shut-off when the pilot flame heating the thermocouple is extinguished.

BASO replacement flame sensor rod with a 7/16-27 thread nut for mounting, male spade bent 90° terminals, and a 0.114" diameter. Y75 Series flame sensors may be used to replace broken or damaged sensing probes in various electronic ignition control systems.

BASO 24v, 1/2"x 3/4", 190 kBTU retrofit gas control system.

BASO 24v magnetic operator assembly.

BASO 24 volt direct-spark ignition that features 3 tries for ignition at 8 seconds, 30-second inter-purge, 30-second pre-purge, 30-second post-purge, 60-minute retry, and remote flame sensing for Lennox pulse furnaces.

BASO 24 volt direct-spark ignition that features 3 tries for ignition at 8 seconds, 30-second inter-purge, 30-second pre-purge, 5-minute retry, and an internal sensor.

BASO 24 volt universal intermittent pilot ignition control board that features 3 tries for ignition at 30 seconds, 15-second inter-purge, no pre-purge, no retry timing, remote or integral flame sensing, for use with or without automatic vent damper.

BASO 24 volt direct-spark ignition that features infinite tries for ignition, 0-second inter-purge, 0-second pre-purge, 0-minute retry, remote sensor, and damper plug.

BASO 24 volt single try for ignition at 10 seconds, no inter-purge, no pre-purge, and no retry timing direct spark ignition control board with remote flame sensing.

BASO direct spark ignition with one trial for ignition at 4 seconds, 30-second inter-purge, and remote flame sensing.

BASO 24 volt three try for ignition at 4 seconds, 30-second inter-purge, no pre-purge, and 5-minute retry timing direct spark ignition control board with remote flame sensing.

BASO 24 volt single try for ignition at 25 seconds, 15-second inter-purge, no pre-purge, and no retry timing intermittent pilot ignition control board with remote flame sensing.

BASO 24 volt single try for ignition at 8 seconds, 15-second inter-purge, no pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing.

BASO 24 volt single try for ignition at 85 seconds, 15-second inter-purge, no pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing and rollout switch.

BASO 24 volt single try for ignition at 25 seconds, 15-second inter-purge, 4-second pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing.

BASO 24 volt single try for ignition at 50 seconds, 15-second inter-purge, 4-second pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing.

BASO 24 volt single try for ignition at 120 seconds, 15-second inter-purge, 4-second pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing.

BASO 24 volt single try for ignition at 85 seconds, no inter-purge, 15-second pre-purge, 5-minute retry timing intermittent pilot ignition control board with remote flame sensing and rollout switch.

BASO single try for ignition at 85 seconds, no inter-purge, 5-minute retry timing intermittent pilot ignition control board.

BASO 24 volt single try for ignition at 8 seconds, 15-second inter-purge intermittent pilot ignition control board.

BASO 24 volt three try for ignition at 25 seconds, 30-second inter-purge, 30-second pre-purge, 5-minute retry timing intermittent pilot ignition control board with remote flame sensing.

BASO 24 volt infinite try for ignition, no inter-purge intermittent pilot ignition control board.

BASO 24 volt single try for ignition at 8 seconds, 15-second inter-purge, no pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing and damper plug.

BASO 24 volt single try for ignition at 85 seconds, 15-second inter-purge, no pre-purge, no retry timing intermittent pilot ignition control board with remote flame sensing and damper plug.

BASO 24 volt single try for ignition at 85 seconds, 15-second inter-purge, no pre-purge, 5-minute retry timing intermittent pilot ignition control board with remote flame sensing and damper plug.

BASO 24 volt single try for ignition at 8 seconds, 4-second inter-purge intermittent pilot ignition control board with remote sensing.

BASO 24 volt single try for ignition at 120 seconds, 15-second inter-purge, 4-second pre-purge, and no retry timing intermittent pilot ignition control board with remote flame sensing and damper plug terminal.

BASO 24 volt single try for ignition at 120 seconds, 15-second inter-purge, 4-second pre-purge, and no retry timing intermittent pilot ignition control board with remote flame sensing and damper plug terminal.