(877) 775-7705 ~ Sorry, we're closed. Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
Bell & Gossett Series e-1532 pumps are custom-built, heavy-duty, close-coupled pumps with a foot-mounted volute and optional base frame pump support. The Series e-1532 are intended to replace older Series 1532 pumps, and are also a good replacement for Taco Series CE/CM and FE/FM pumps. The Series e-1532 comes standard with a DPPE drip-proof premium efficient motor in 208-230/460V, 60Hz, three phase operation with the option of 1750 RPM or 3500 RPM. The bronze-fitted pumps also feature stainless steel impeller, shaft sleeves, and mechanical seals rated to 225°F. Please specify total feet of head and GPM when ordering.
This Bell & Gossett Series e-1532 model 1.5AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 1 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 1-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 5 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 7-1/2 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 10 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 3 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 15 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 20 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 25 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.5BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/2" NPT discharge and a 2" NPT end suction. Its motor is 30 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 1 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 5 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 7-1/2 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 1-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 3 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 10 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 15 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 20 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 1.25BC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 1-1/4" NPT discharge and a 1-1/2" NPT end suction. Its motor is 25 HP, 3525 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 1 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 1-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 5 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 7-1/2 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 10 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 15 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5AC is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 20 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5BB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 5 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5BB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 7-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5BB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 30 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5BB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 40 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2.5BB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2-1/2" NPT discharge and a 3" NPT end suction. Its motor is 50 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 1 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 1-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 7-1/2 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 10 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2AD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 15 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2BD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 3 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2BD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 5 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2BD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 20 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2BD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 25 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2BD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 30 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2BD is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 2-1/2" NPT end suction. Its motor is 40 HP, 3550 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2EB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 3" NPT end suction. Its motor is 5 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2EB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 3" NPT end suction. Its motor is 7-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2GB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 3" NPT end suction. Its motor is 7-1/2 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2GB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 3" NPT end suction. Its motor is 10 HP, 1750 RPM, three phase, and open drip proof (ODP).
This Bell & Gossett Series e-1532 model 2GB is a heavy-duty, close-coupled, foot-mounted centrifugal pump used for commercial hydronic heating and cooling. This pump features a 2" NPT discharge and a 3" NPT end suction. Its motor is 15 HP, 1750 RPM, three phase, and open drip proof (ODP).
Do you have a Bell & Gossett pump you need to repair? First, you need to determine what pump you have. Bell & Gossett manufacturers hundreds of different pumps, from small residential boosters to large base-mounted centrifugal pumps. Properly identifying your pump is critical to maintaining its good health. In this video, the Pump Doctor will go through a few B&G pumps and explain what the different cast numbers, tags, and labels all mean.
