Bradley 1/2" NPT, bronze foot valve for circular washfountains.

Bradley 1/2" NPT, bronze mixing valve for foot control (bottom supply) on circular washfountains.

Bradley 1/2" NPT, bronze mixing valve for foot control (top supply) on circular washfountains.

Bradley 1/2" NPT, bronze Vernatherm thermostatic mixing valve for use from the water supply to circular washfountains.

Bradley upper valve body assembly for mixing valves on Bradley 90-75 metering lavatory faucets.

Bradley upper valve body assembly for mixing valves on Bradley 90-75 metering lavatory faucets.

Bradley nylon soap filler cap for use on model numbers S93-570, S93-535, S93-577, S93-588, S93-595, S93-596, S93-597, and S93-602.

Bradley packing nut for S09 series soap dispensing valves.

Bradley EquaFlo cap and clamp.

Bradley washer for S24-072 showerheads.

Bradley rubber foot valve diaphragm for circular washfountains. This diaphragm has a 1-5/8" OD.

Bradley support tube gasket for all shower sprayheads, except stainless steel. This gasket has a 4-7/16" OD and a 3-9/16" ID.

Bradley rubber semi-circle sprayhead grommet for semi-circle washfountains. This grommet has a 6-1/4" OD and is 1/2" thick.

Bradley rubber circle sprayhead grommet for circle washfountains. This grommet has a 5-13/16" ID and a 6-7/16" OD.

Bradley rubber semi-circle sprayhead grommet for semi-circle washfountains.

Bradley rubber o-ring for S45-323 column shower diverters. This o-ring has a 13/16" diameter and is 1/16" thick.

Bradley unplated brass tailpiece for use with model numbers S93-570, S93-535, S93-595, S93-596, S93-597, and S93-602.

Bradley metal washer for S09-38S soap dispensing valves.

Bradley foot valve operating lever for circular washfountains.

Bradley juvenile height operating rod assembly, which includes a spring and rod. This operator fits between the operating lever on the foot valve and the operating cross (on full circle fountains) or foot lever (on semi-circle fountains). The rod is 8-1/2" long.

Bradley operating rod assembly, which includes a spring and rod. This operator fits between the operating lever on the foot valve and the operating cross (on full circle fountains) or foot lever (on semi-circle fountains). The rod is 12-1/8" long.

Bradley operating cross that connects from the foot bar to the linkage to the foot valve on circular washfountains.

Bradley hex nut for S09 series liquid soap valves on circular washfountains.

Bradley plastic plunger guide for circular washfountains.

Bradley foot valve needle assembly for S07-016 washfountain foot valves.

Bradley strainer and screw pack for washfountains.

Bradley foot lever lift spring for classic washfountains.

Bradley vertical liquid soap valve, which includes a valve nut and three washers, for heavy body soaps on circular washfountains.

Bradley chrome plated liquid soap valve for circular washfountains.

Bradley Celcon liquid soap valve for lotion soaps on circular washfountains.

Bradley foot valve plunger assembly for circular washfountains.

Bradley sprayhead poppet assembly.

Bradley washer & gasket kit for SO27-022 mixing valve on column showers.

Bradley flow control spindle on valve assembly.

Bradley EquaFlo gasket kit, which includes o-rings and washers.

Bradley .5 GPM flow control assembly for showerheads.

Bradley sprayhead grommet for corner washfountains.

Bradley horizontal lotion valve for use with safety showers and eyewashes.

Bradley 54" foot lever for use with wash fountains.

Bradley 36" foot lever for use with wash fountains.

Bradley thermostat repair kit for HL45 and TMV45 mixing valves.

Bradley piston and liner repair kit for HL45 and TMV45 mixing valves.

Bradley washer and seal repair kit for HL45 and TMV45 mixing valves.

Bradley o-ring repair kit for HL45 and TMV45 mixing valves.

Bradley check valve stop repair kit for HL45 and TMV45 mixing valves.

Bradley center section repair kit for HL45 mixing valves.

Bradley thermostat repair kit for HL80 and TMV80 mixing valves.

Bradley piston and liner repair kit for HL80 mixing valves.

Bradley washer and seal repair kit for HL80 mixing valves.

Bradley o-ring repair kit for HL80 mixing valves.