Sloan Valve wheel handle stop repair kit for 1" H-600 and all H-700.
Sloan Valve locking stop cap designed for use with H-700-A (1" and 3/4") and H-600-A (1") Bak-Chek screwdriver control stops.
Sloan Valve vacuum breaker repair kit for V-100 series vacuum breakers.
Sloan Valve vacuum breaker with 3/4" x 9" tailpiece.
Sloan Valve vacuum breaker with 1-1/2" x 21-1/2" tailpiece.
Sloan Valve 1" screwdriver stop repair kit for H-440 and H-445. This kit includes shield, packing disc, stem, rubber plug, and packing ring.
Sloan Valve G2 Optima Plus manual override button assembly with screws.
Sloan Valve inside cover that fits all diaphragm style flushometers. This black plastic cover sits on top of the diaphragm and under the metal outside cover. This A-71 inside cover creates a water tight chamber which plays a crucial role in the proper operation of the flushometer. A crack in this cover can cause chatter, an extended flush, or non-stop flushing.
Sloan Valve 1-1/4" spud coupling assembly, including spud coupling and flange.
Sloan Valve dual filter diaphragm assembly repair kit for 3.5 GPF toilets. This kit is designed to service all Sloan diaphragm type flushometers. All the main valve repair parts are pre-assembled with the new dual-filtered diaphragm that stops dirt and debris before it causes valve "run-on". The main valve kit includes a relief valve, molded disc, diaphragm, and guide assembly. This kit will solve most flushometer operation problems.
Sloan Valve control stop repair kit for use with 1" and 3/4" H-700-A and 1" H-600-A Back Check screwdriver control stops. This kit replaces all the internal components of the stop valve. The rubber bumper is spring loaded to act as a check valve. A straight blade screwdriver will open and close the valve. This kit also repairs 3/4" and 1" H-740, as well as, 1" H-540.
Sloan Valve G2 electric module assembly for battery operated Optima toilets, which includes an electronic module, isolated solenoid, and inner cover.
Sloan Valve Royal performance kit for 1.6 GPF toilets. This kit includes a dual filtered diaphragm drop-in kit, triple seal handle repair kit, high back pressure vacuum breaker repair kit, and o-ring.
Sloan Valve 2-1/16" tail assembly designed for use with Royal and Regal flushometers. This assembly includes o-ring, lock ring, and tailpiece.
Sloan Valve high back pressure vacuum breaker repair kit for all Sloan flushometers. This kit includes a friction ring, baffle, and vacuum breaker sack. This upgraded kit features a skirt around the base to prevent any leaking caused by the higher back pressure caused by low consumption fixtures.
Sloan Valve Optima battery-powered, sensor-operated G2 retrofit conversion kit for exposed closet flushometers. The RESS-C is furnished with two flush regulators, one for 1.6 GPF (pre-installed) and one for 3.5 GPF.
Sloan Valve G2 solenoid with isolated operator. This solenoid is located inside the flushometer head and below the control module assembly. The solenoid threads into the metal inside cover. When the module triggers the start of a flush cycle this solenoid is activated. The solenoid shaft moves and releases pressure inside the valve which starts the diaphragm flush cycle.
Sloan Valve actuator cartridge repair kit, which includes spring, o-ring, plunger guide, solenoid valve seat, and valve piston assembly. This kit is for use with Optima flushometers.
Sloan Valve flex tube diaphragm kit for sensor-operated toilet flush valves, including two regulators, a flow ring, o-ring, flex tube diaphragm, and valve body. This kit features a PERMEX synthetic rubber diaphragm with dual filtered fixed bypass, which prevents deterioration and clogging. It is shipped with the 1.6 GPF regulator installed, but can be converted to a 3.5 GPF flush.
Sloan Valve control stop repair kit for use with 3/4" H-600-A screwdriver control stops, including a spring and control stops. This kit replaces all the internal components of the stop valve. The rubber bumper is spring loaded to act as a check valve. A straight blade screwdriver will open and close the valve. This kit also repairs 3/4" H-540-A (with H-37 cap) Back Check screwdriver control stops.