Conbraco standard pattern bronze water gauge used for all types of liquid level verification, which is rated to 125 psig at 350°F and to 300 psig at 100°F. This gauge has a pipe size of 3/8", a glass OD of 5/8", a glass length of 10", and a composition wheel.

Conbraco standard pattern bronze water gauge used for all types of liquid level verification, which is rated to 125 psig at 350°F and to 300 psig at 100°F. This gauge has a pipe size of 1/2", a glass OD of 5/8", a glass length of 12", and a composition wheel.

Conbraco square pattern bronze water gauge, which is rated to 200 psig at 400°F and to 400 psig at 100°F. This gauge has a pipe size of 1/2", a glass OD of 5/8", a glass length of 12", a composition wheel, a polished finish, and an automatic ball check. Four guard rods are standard.

Conbraco square pattern bronze water gauge, which is rated to 200 psig at 400°F and to 400 psig at 100°F. This gauge has a pipe size of 3/4", a glass OD of 3/4", a glass length of 16", a composition wheel, a polished finish, and an automatic ball check. Four guard rods are standard.

Conbraco chain lever water gauge for use on large boilers with inconvenient columns, which is rated to 250 psig at 400°F and to 500 psig at 100°F. This gauge has a pipe size of 1/2", a glass OD of 5/8", and a glass length of 12". The lever on a standard 12" chain allows operator to open and close valves that would be beyond reach. The valve stem operates on quarter-turns. High pressure glass and PTFE reinforced gauge glass gaskets are standard.

Conbraco chain lever water gauge for use on large boilers with inconvenient columns, which is rated to 250 psig at 400°F and to 500 psig at 100°F. This gauge has a pipe size of 3/4", a glass OD of 3/4", and a glass length of 16". The lever on a standard 12" chain allows operator to open and close valves that would be beyond reach. The valve stem operates on quarter-turns. High pressure glass and PTFE reinforced gauge glass gaskets are standard.

Conbraco 5/8" brass friction ring, used in water level gauges between the glass gasket and glass nut to provide proper sealing of the gasket.

Conbraco 3/4" brass friction ring, used in water level gauges between the glass gasket and glass nut to provide proper sealing of the gasket.

Conbracco 3/4" rubber gauge glass gasket.

Conbarco 5/8" brass gauge glass nut.

Conbarco 3/4" brass gauge glass nut.

Conbraco 3/16" x 26" copper gauge class protection rod.

Conbraco 3/16" x 50" copper gauge class protection rod.

Conbraco composite wheel for 200 psi gauges.

Conbraco air relief valve with a 1/4" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 100 psi, 92 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 1/4" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 125 psi, 112 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 1/4" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 150 psi, 133 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 3/8" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 100 psi, 230 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 3/8" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 125 psi, 281 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 3/8" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 150 psi, 332 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 1/2" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 100 psi, 230 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 1/2" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 125 psi, 281 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco air relief valve with a 1/2" NPT connection which vents to atmosphere with a manual pull-ring. This valve is set at 150 psi, 332 SCFM, and is ASME national board certified from 15 psi through 250 psi. It's maximum temperature is 325°F.

Conbraco low steam relief valve with a 3/4" male x female NPT connection. This valve is set at 8 psi, 346 pounds per hour, and is ASME national board certified to 15 psi.

Conbraco low steam relief valve with a 3/4" male x female NPT connection. This valve is set at 10 psi, 383 pounds per hour, and is ASME national board certified to 15 psi.

Conbraco low steam relief valve with a 3/4" male x female NPT connection. This valve is set at 15 psi, 475 pounds per hour, and is ASME national board certified to 15 psi.

Conbraco steam relief valve with a 3/4" NPT inlet by 1" NPT outlet connection in an angle pattern. This valve is set at 100 psi.

Conbraco steam relief valve with a 3/4" NPT inlet by 1" NPT outlet connection in an angle pattern. This valve is set at 150 psi.

Conbraco low steam relief valve with a 1" male x female NPT connection. This valve is set at 15 psi, 643 pounds per hour, and is ASME national board certified to 15 psi.

Conbraco high pressure steam relief valve with a 1" NPT inlet by 1" NPT outlet connection in an angle pattern.

Conbraco high pressure steam relief valve with a 1" NPT inlet by 1-1/4" NPT outlet connection in an angle pattern. This valve is set to 150 psi.

Conbraco high pressure steam relief valve with a 1-1/4" NPT inlet by 1-1/4" NPT outlet connection in an angle pattern. This valve is set to 50 psi.

Conbraco high pressure steam relief valve with a 1-1/4" NPT inlet by 1-1/2" NPT outlet connection in an angle pattern. This valve is set to 125 psi.

Conbraco high pressure steam relief valve with a 1-1/4" NPT inlet by 1-1/2" NPT outlet connection in an angle pattern. This valve is set to 150 psi.

Conbraco low steam relief valve with a 1-1/4" male x 1-1/4" female NPT connection. This valve is set at 15 psi, 1200 pounds per hour, and is ASME national board certified to 15 psi.

Conbraco high pressure steam relief valve with a 1-1/2" NPT male x 1-1/2" female connection in an angle pattern.

Conbraco low steam relief valve with a 1-1/2" NPT male x 2" female NPT connection. This valve is set to 125 psi.

Conbraco low steam relief valve with a 1-1/2" NPT male x 2" female NPT connection. This valve is set to 150 psi.

Conbraco low steam relief valve with a 1-1/2" NPT male x 2" female NPT connection. This valve is set at 15 psi, 1900 pounds per hour, and is ASME national board certified to 15 psi.

Conbraco high pressure steam relief valve with a 2" male NPT x 2" female NPT connection in an angle pattern.

Conbraco high pressure steam relief valve with a 2" male NPT x 2-1/2" female NPT connection in an angle pattern.

Conbraco high pressure steam relief valve with a 2-1/2" male NPT x 2-1/2" female NPT connection in an angle pattern.

Conbraco low pressure, high capacity steam relief valve with a 2" male x female NPT connection with one piece bronze body construction for commercial and industrial boilers. This valve is set at 15 psi, 3150 pounds per hour, and is national board certified to 15 psi.

Conbraco low pressure, high capacity steam relief valve with a 2-1/2" male x female NPT connection with one piece bronze body construction for commercial and industrial boilers. This valve is set at 15 psi, 4676 pounds per hour, and is national board certified to 15 psi.

Conbraco low pressure, high capacity steam relief valve with a 3" male x female NPT connection with one piece bronze body construction for commercial and industrial boilers. This valve is set at 15 psi, 6843 pounds per hour, and is national board certified to 15 psi.

Apollo 1/4" NPT full port bronze ball valve is rated 150# SWP and 600# CWP.

Apollo 3/8" NPT full port bronze ball valve is rated 150# SWP and 600# CWP.

Apollo 1/2" NPT full port bronze ball valve is rated 150# SWP and 600# CWP.

Apollo 3/4" NPT full port bronze ball valve is rated 150# SWP and 600# CWP.

Apollo 1" NPT full port bronze ball valve is rated 150# SWP and 600# CWP.