Honeywell 24 VAC, SPST, 30 amp compressor relay for use with DR90 and DR120 series compressors.

Honeywell compressor overload for use with DR65A1000 compressors.

Honeywell 24 VAC, DPST, 30 amp compressor relay for use with DR65 series compressors.

Danfoss type SC light commercial reciprocating compressor for R134A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss type SC light commercial reciprocating compressor for R134A and R404A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss type SC light commercial reciprocating compressor for R134A and R507A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss type NF light commercial compressor kit for R134A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss type NF light commercial compressor kit for R134A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss Type NTZ low temperature reciprocating compressor for use with R404A and R507A refrigerant, as well as POE oil. This compressor is 200-230v, three phase, 60Hz, and has a capacity of 4490 BTU/HR (BTU/HR is based on an evaporator temperature of -25°F, a condenser temperature of 105°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-1/4" Rotolock suction connection with a 5/8" ODF (sweat) sleeve, a 1" Rotolock discharge (liquid) connection with a 1/2" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type NTZ low temperature reciprocating compressor for use with R404A and R507A refrigerant, as well as POE oil. This compressor is 200-230v, three phase, 60Hz, and has a capacity of 10536 BTU/HR (BTU/HR is based on an evaporator temperature of -25°F, a condenser temperature of 105°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type NTZ low temperature reciprocating compressor for use with R404A and R507A refrigerant, as well as POE oil. This compressor is 200-230v, three phase, 60Hz, and has a capacity of 13901 BTU/HR (BTU/HR is based on an evaporator temperature of -25°F, a condenser temperature of 105°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 1-1/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type NTZ low temperature reciprocating compressor for use with R404A and R507A refrigerant, as well as POE oil. This compressor is 200-230v, single phase, 60Hz, and has a capacity of 4547 BTU/HR (BTU/HR is based on an evaporator temperature of -25°F, a condenser temperature of 105°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-1/4" Rotolock suction connection with a 5/8" ODF (sweat) sleeve, a 1" Rotolock discharge (liquid) connection with a 1/2" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 36,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 3/4" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 38,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 3/4" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 49,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 51,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 54,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 56,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HLH high temperature/air conditioning light commercial scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-130°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 68,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 41,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 3/4" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 51,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 3/4" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HLH high temperature/air conditioning light commercial scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-130°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 68,000 BTU/HR. This compressor features internal motor protection and screw terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HLJ high temperature/air conditioning light commercial scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-130°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 72,000 BTU/HR. This compressor features internal motor protection and screw terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HLJ high temperature/air conditioning light commercial scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-130°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 83,000 BTU/HR. This compressor features internal motor protection and screw terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 200-220v (50Hz) or 208-230v (60Hz), three phase, and has a capacity of 41,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 3/4" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 200-220v (50Hz) or 208-230v (60Hz), three phase, and has a capacity of 44,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 3/4" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HLH high temperature/air conditioning light commercial scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-130°F. This compressor is 200-220v (50Hz) or 208-230v (60Hz), three phase, and has a capacity of 72,000 BTU/HR. This compressor features internal motor protection and screw terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HLP high temperature/air conditioning light commercial scroll compressor for use with R407C and R22 refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-130°F. This compressor is 380-415v (50Hz) or 460v (60Hz), three phase, and has a capacity of 75,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type HRH high temperature/air conditioning residential scroll compressor for use with R410A refrigerant, as well as PVE oil, with ARI conditions and a design that has been optimized for 45-100°F. This compressor is 208-230v, single phase, 60Hz, and has a capacity of 29,000 BTU/HR. This compressor features internal motor protection and spade terminals. It also has a 7/8" ODF (sweat) suction connection and a 1/2" ODF discharge (liquid) connection.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 380-400v (50Hz) or 460v (60Hz), three phase, and has a capacity of 56336 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F) or a capacity of 46521 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 1-1/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 200-230v (60Hz), three phase, and has a capacity of 56336 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 0°F) or a capacity of 46521 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 1-1/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss type BD light commercial direct current reciprocating compressor kit for R134A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss 115v, single phase compressor for R134A refrigerant.

Danfoss 220-240v, three phase compressor for R134A refrigerant.

Danfoss 460v, three phase compressor for R134A refrigerant.

Danfoss type TL reciprocating compressor for R134A refrigerant.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 380-400v (50Hz) or 460v (60Hz), three phase, and has a capacity of 38881 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 32451 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss type TL reciprocating compressor for R134A refrigerant.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 208-230v (60Hz), single phase, and has a capacity of 44404 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 36056 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss type TL reciprocating compressor for R134A refrigerant.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 200-230v (60Hz), three phase, and has a capacity of 44404 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 36056 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss 115v, single phase, 1/4 HP compressor for R134A refrigerant.

Danfoss 115v, single phase, 1/7 HP compressor for R134A refrigerant.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 200-230v (60Hz), three phase, and has a capacity of 50000 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 40894 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss 220v, single phase, 1/4 HP compressor for R134A refrigerant.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 380-400v (50Hz) or 460v (60Hz), three phase, and has a capacity of 50000 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 40894 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 208-230v (60Hz), single phase, and has a capacity of 27864 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 23031 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 5/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss type SC light commercial reciprocating compressor for R134A refrigerant. This compressor is specially optimized for use in mobile, household, and light commercial applications. Hermetic reciprocating compressors provide high cooling capacity in an energy saving design.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 200-230v (60Hz), three phase, and has a capacity of 27864 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 23031 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 5/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.

Danfoss Type MTZ reciprocating compressor for use with R404A, R407C, R134A, and R407F refrigerant, as well as polyester oil. This compressor is 380-400v (50Hz) or 460v (60Hz), three phase, and has a capacity of 30110 BTU/HR (BTU/HR is based on R134A refrigerant use, an evaporator temperature of 45°F, a condenser temperature of 130°F, SuperHeat of 20°F, and SubCooling of 15°F) or a capacity of 24323 BTU/HR (BTU/HR is based on R404A or R507A refrigerant use, an evaporator temperature of 20°F, a condenser temperature of 120°F, SuperHeat of 20°F, and SubCooling of 0°F). It also has a 1-3/4" Rotolock suction connection with a 7/8" ODF (sweat) sleeve, a 1-1/4" Rotolock discharge (liquid) connection with a 3/4" ODF (sweat) sleeve, and a 3/8" NPT oil equalization connection.