
Honeywell RP7517A1009 - Transducer
Honeywell electronic-pneumatic transducer with a 0-18 psi range (3-15 psi output), no internal power supply (2-wire), and 30" lead wire connections.
ATTN: Small pack shipments are experiencing 2-3 day carrier delays. If you choose to ship LTL, choose priority for more reliable delivery times.
(877) 775-7705 ~ Sorry, we're closed. Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
Honeywell electronic-pneumatic transducer with a 0-18 psi range (3-15 psi output), no internal power supply (2-wire), and 30" lead wire connections.
Honeywell electronic-pneumatic transducer with a 0-18 psi range (3-15 psi output), no internal power supply (2-wire for panel mounting), screw terminals, and 30" lead wire connections.
Honeywell electronic-pneumatic transducer with a 0-18 psi range (3-15 psi output), external transformer (3-wire), and 30" lead wire connections.
Honeywell electronic-pneumatic transducer with a 0-18 psi range (3-15 psi output), external transformer (3-wire), and 30" lead wire connections.
Johnson Controls low volume electro-pneumatic transducer with a 1-18 psi output range and input range of 0-10 VDC. This unit converts 0-10 VDC signal from an electrical controller into a proportional pneumatic output signal.
Johnson Controls high volume electro-pneumatic transducer with a .5-19 psi output range and input range of 0-10 VDC. This unit converts 0-10 VDC signal from an electrical controller into a proportional pneumatic output signal.
Johnson Controls low volume electro-pneumatic transducer with a 3-15 psi output range and input range of 40-20 mA DC. This unit converts 40-20 mA DC signal from an electrical controller into a proportional pneumatic output signal.
Johnson Controls high volume electro-pneumatic transducer with a 3-15 psi output range and input range of 40-20 mA DC. This unit converts 40-20 mA DC signal from an electrical controller into a proportional pneumatic output signal.
Siemens A-OP, panel-mounted transducer designed to receive an electronic signal and send a pneumatic output.
Siemens transducer that interfaces between phase cut controllers and valves or actuators. This transducer features 0-20 Vdc input, 0-10 Vdc output, and two operating ranges.
Johnson Controls electronic pressure transducer for 0 to 508 psi (0 to 35 bar) with a 1/4" SAE female flare connection and 6.6' cable (2 meter).
Johnson Controls electronic pressure transducer for 0 to 754 psi (0 to 52 bar) with a 1/4" SAE female flare connection and 6.6' cable.
Johnson Controls pressure transducer with 0-100 psi pressure range, 0.5-4.5 VDC output signal, and 1/8" NPT external thread (style 49).
Johnson Controls pressure transducer with 0-100 psi pressure range, 0.5-4.5 VDC output signal, 1/8" NPT external thread (style 49), and 6.5' wire harness.
Johnson Controls pressure transducer with 0-200 psi pressure range, 0.5-4.5 VDC output signal, and 1/8" NPT external thread (style 49).
Johnson Controls pressure transducer with 0-500 psi pressure range, 0.5-4.5 VDC output signal, and 1/8" NPT external thread (style 49).
Johnson Controls pressure transducer with 0-500 psi pressure range, 0.5-4.5 VDC output signal, 1/8" NPT external thread (style 49), and 6.5' wire harness.
Johnson Controls pressure transducer with 0-750 psi pressure range, 0.5-4.5 VDC output signal, and 1/8" NPT external thread (style 49).
Johnson Controls pressure transducer with -10 to 100 psi pressure range, 0.5-4.5 VDC output signal, and 1/8" NPT external thread (style 49).
Johnson Controls pressure transducer with 0.5 to 4.5 VDC output signal, 0 to 100 psi range, 1/4" SAE 45° Flare internal thread, and packard electrical connection.
Johnson Controls pressure transducer kit with 0.5 to 4.5 VDC output signal, 0 to 100 psi range, 1/4" SAE 45° Flare internal thread, and packard electrical connection, includes 6.6' wiring harness.
Johnson Controls pressure transducer with 0.5 to 4.5 VDC output signal, 0 to 500 psi range, 1/4" SAE 45° Flare internal thread, and packard electrical connection.
Johnson Controls pressure transducer kit with 0.5 to 4.5 VDC output signal, 0 to 500 psi range, 1/4" SAE 45° Flare internal thread, and packard electrical connection, includes 6.6' wiring harness.
Johnson Controls pressure transducer with 0.5 to 4.5 VDC output signal, 0 to 750 psi range, 1/4" SAE 45° Flare internal thread, and packard electrical connection.
Johnson Controls pressure transducer kit, 0.5 to 4.5 VDC output signal, 0 to 750 psi range, 1/4" SAE 45° Flare internal thread, and packard electrical connection, includes 6.6' wiring harness.