Danfoss packing gland for all RA-2000 series valves.

Danfoss packing gland for older RAV series valves.

Danfoss 1/2" FIP non-electric, side mounted angle-pattern, thermostatic radiator valve with a 1/2" male union nut and nipple. Side mount valves are for use with built-in operators, which also contain a temperature sensor. Although the inlet to outlet connection is an angle pattern, the sensor mounts off to the side of the valve to prevent ambient temperature from rising up into the operator.

Danfoss 1/2" FIP non-electric, angle-pattern, top mount, thermostatic radiator valve with a 1/2" male union nut and nipple. This valve is for use with remote operators, which prevent ambient temperature from rising into the operators.

Danfoss 1/2" FIP non-electric, straight-pattern, flex mount, thermostatic radiator valve with a 1/2" male union nut and nipple. This valve is for use with both remote and built-in operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 3/4" FIP non-electric, side mounted, angle-pattern, thermostatic radiator valve with a 3/4" male union nut and nipple. Side mount valves are for use with built-in operators, which also contain a temperature sensor. Although the inlet to outlet connection is an angle pattern, the sensor mounts off to the side of the valve to prevent ambient temperature from rising up into the operator.

Danfoss 3/4" FIP non-electric, angle-pattern, top mount, thermostatic radiator valve with a 3/4" male union nut and nipple. This valve is for use with remote operators, which prevent ambient temperature from rising into the operators.

Danfoss 3/4" FIP non-electric, straight-pattern, flex mount, thermostatic radiator valve with a 3/4" male union nut and nipple. This valve is for use with both remote and built-in operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 3/4" double solder union, non-electric straight-pattern thermostatic radiator valve. This valve is for use with both remote and built-in operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 1" FIP non-electric, side mounted, angle-pattern, thermostatic radiator valve with a 1" male union nut and nipple. Side mount valves are for use with built-in operators, which also contain a temperature sensor. Although the inlet to outlet connection is an angle pattern, the sensor mounts off to the side of the valve to prevent ambient temperature from rising up into the operator.

Danfoss 1" FIP non-electric, angle-pattern, top mount, thermostatic radiator valve with a 1" male union nut and nipple. This valve is for use with remote operators, which prevent ambient temperature from rising into the operators.

Danfoss 1" FIP non-electric, straight-pattern, flex mount, thermostatic radiator valve with a 1" male union nut and nipple. This valve is for use with both remote and built-in operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 1-1/4" FIP non-electric, side mount, angle-pattern, thermostatic radiator valve with a 1-1/4" male union nut and nipple. This valve is for use with built-in operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 1-1/4" FIP non-electric, angle-pattern, top mount, thermostatic radiator valve with a 1-1/4" male union nut and nipple. This valve is for use with remote operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 1-1/4" FIP non-electric, straight-pattern, flex mount, thermostatic radiator valve with a 1-1/4" male union nut and nipple. This valve is for use with both remote and built-in operators, which prevent ambient temperature from rising into the operators. When using a built-in operator turn the valve so that the sensor is on the side rather than the top.

Danfoss 1/8" FIP non-electric one-pipe zone valve with a 1/8" male union nut and nipple. This valve is for use with both remote and built-in operators, which prevent ambient temperature from rising into the operators.

Danfoss adapter used to mount RA-2000 series operators onto RA series valves.

Danfoss adapter used to mount RAV-2000 series operators onto RAV series valves.

Danfoss operator gasket for RA-2000 radiator valve bodies.

Danfoss non-electric thermostat operator with a temperature range of 45-86°F. This operator features a valve-mounted dial and sensor.

Danfoss non-electric thermostat operator with a temperature range of 45-86°F. This operator features a combined remote mounted dial and sensor. It also has a 6' capillary.

Danfoss non-electric thermostat operator with a temperature range of 45-86°F. This operator features a combined remote mounted dial and sensor. It also has a 16' capillary.

Danfoss non-electric thermostat operator with a temperature range of 45-86°F. This operator features a separate remote mounted dial and sensor with dual 6' capillaries. It also includes sockets for use on RAV, KOVM, and VMT valve bodies.

Danfoss non-electric thermostat operator with a temperature range of 45-86°F. This operator features a tamper-resistant, built-in valve mounted dial and sensor.

Danfoss non-electric thermostat operator with a temperature range of 45-86°F. This operator features a valve-mounted dial with remote sensor and 6' capillary.