Fenwal -100/400°F stainless steel thermoswitch control.

Fenwal 120vac Direct Spark Ignition (DSI) control potted.

Fenwal 12 VDC microprocessor-based, direct spark ignition control for heating applications. This ignition control features combustion blower control, LED diagnostic output, and 7-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition module. This control features a special small footprint configuration, noryl gray enclosure, single try for ignition, remote flame sense, 15-second inter-purge, and 15-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features a standard CE approved design, noryl gray enclosure, single try for ignition, remote flame sense, and 10-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features a standard design, noryl gray enclosure, single try for ignition, local flame sense, and 4-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features a standard design, noryl gray enclosure, 3 tries for ignition, remote flame sense, 30-second inter-purge, and 7-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, single try for ignition, remote flame sense, and 4-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, single try for ignition, remote flame sense, and 7-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, single try for ignition, remote flame sense, and 10-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, single try for ignition, remote flame sense, and 15-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, single try for ignition, remote flame sense, 15-second pre-purge, and 4-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, single try for ignition, remote flame sense, 30-second pre-purge, and 4-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, 3 tries for ignition, local flame sense, 15-second pre-purge, 15-second inter-purge, and 10-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, 3 tries for ignition, remote flame sense, 15-second pre-purge, 15-second inter-purge, and 4-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, 3 tries for ignition, remote flame sense, 15-second pre-purge, 15-second inter-purge, and 10-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, 3 tries for ignition, remote flame sense, 30-second pre-purge, 30-second inter-purge, and 7-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control. This control features an edge connector, noryl gray enclosure, 3 tries for ignition, remote flame sense, 30-second pre-purge, 30-second inter-purge, and 15-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with a special Triton Mod configuration.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with a special Coleman configuration.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with a special G765BCA-12 configuration.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with a special OEM configuration.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a standard design, 3 tries for ignition, remote flame sense, 15-second pre-purge, 15-second inter-purge, and 4-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a standard design, 3 tries for ignition, remote flame sense, 30-second post-purge, 15-second pre-purge, 15-second inter-purge, and 10-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a standard design, 3 tries for ignition, remote flame sense, 30-second post-purge, 30-second pre-purge, 30-second inter-purge, and 7-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a standard design, 3 tries for ignition, remote flame sense, 30-second post-purge, 30-second pre-purge, 30-second inter-purge, and 15-second TFI.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a special Armstrong replacement design.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a special Armstrong replacement design.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a special Greenheck design.

Fenwal 24 VAC microprocessor-based, direct spark ignition control with inducer blower relay. This control features a special Calcana design.

Fenwal 24 VAC microprocessor-based, intermittent pilot ignition control. This control features re-ignition after loss of flame, a noryl gray enclosure, single try ignition, remote flame sense, thermostat/power off reset, and 15-second TFI.

Fenwal 24 VAC microprocessor-based, intermittent pilot ignition control for Johnson Controls G77x Series. This control features recycle after loss of flame, a noryl gray enclosure, single try ignition, remote flame sense, thermostat/power off reset, 4-second pre-purge, 15-second inter-purge, and 50-second TFI.

Fenwal 24 VAC microprocessor-based, intermittent pilot ignition control for Johnson Controls. This control features 4-second pre-purge, 15-second inter-purge, and 50-second TFI.

Fenwal 120/240 field selectable voltage microprocessor-based, hot surface ignition control. This control features 20-second heat-up, all QC terminals without full time power, three tries for ignition without automatic reset, remote flame sense, and 7-second TFI.

Fenwal 120/240 VAC mini-ignitor microprocessor-based, hot surface ignition control. This control features 6-second heat-up, all QC terminals without full time power, three tries for ignition with one-hour automatic reset, remote flame sense, 15-second inter-purge, and 4-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features a special CE approval.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features single try for ignition and 4-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features three tries for ignition, 15-second inter-purge, and 4-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features single try for ignition and 7-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features three tries for ignition and 7-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features three tries for ignition, 15-second inter-purge, and 5-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features three tries for ignition, 15-second inter-purge, and 7-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features single try for ignition and 7-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features 7-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features 45-second pre-purge, 45-second inter-purge, and 4-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features 5-second ignition and 5-second heat-up.

Fenwal 120V ignitor microprocessor-based, hot surface ignition control. This control features 20-second heat-up.

Fenwal 120V ignitor microprocessor-based, hot surface ignition control. This control features 20-second heat-up.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features 15-second pre-purge, single try for ignition, and 4-second TFI.

Fenwal 24 VAC ignitor microprocessor-based, hot surface ignition control. This control features 15-second pre-purge and 4-second TFI.