5/8" J seal kit with gaskets for Skidmore pumps, models 10MX, 10ME, VJS, VJSS, and HJS-J with 3450 RPM and all HP motors.

7/8" S seal kit with gaskets for Skidmore pumps, models VCS/VCSS with 1750 RPM 1 to 2 HP motors and 3500 RPM 1-1/2 to 3 HP motors, as well as, models VES/VESS with 1750 RPM 3/4 to 2 HP motors. This seal also fits models HCPS and HSS with 1750 RPM 1 to 2 HP motors, as well as, and 3500 RPM 1-1/2 and 3 HP motors.

5/8" S seal kit with gaskets for Skidmore pumps, models 10M or CCVS with 1750 RPM 1/4 HP motors and 3500 RPM all HP motors, as well as, models VCS, VCSS, HCPS, and HSS with 1750 RPM 1/4 to 3/4 HP motors and 3500 RPM 3/4 and 1 HP motors.

1-1/8" S seal kit with gaskets for Skidmore pumps, models VCS/VCSS and HCPS/HSS with 1750 RPM 3 to15 HP motors, as well as, 3500 RPM 5 to 15 HP motors.

Standard gasket for 5/8" gauge glass.

3" x 1-1/2" x 15' 6 lb. strip of koalwool, rated to 2300°F.

48" x 50' roll of 20 mil PVC pipe insulation jacketing, covers 200 sq. ft.

Generic bolt pack, including one 2" 150 lb flange gasket with four 5/8" nuts and four 5/8" bolts.

Generic bolt pack, including one 5" 150 lb flange gasket with eight nuts and eight bolts.

Generic bolt pack, including one 10" 150 lb flange gasket with twelve nuts and twelve bolts.

Generic bolt pack, including one 12" 150 lb flange gasket with twelve nuts and twelve bolts.

Generic bolt pack, including one 14" 150 lb flange gasket with twelve nuts and twelve bolts.

Generic bolt pack, including one 16" 150 lb flange gasket with sixteen nuts and sixteen bolts.

3/8" nickel-plated steel acorn cap nuts.

1-3/4" x 1-1/4" brass friction ring.

1-1/2" x 10 yards plumber's sand cloth.

General purpose 4" x 18" brush with bent handle.

Generic Ni-Resist seal kit, including body gasket, for all old-style series 1600 pumps.

Generic bolt pack, including one 1-1/2" 150 lb flange gasket with four 5/8" nuts and bolts.

This motor can be used as an alternative to Bell & Gossett motor number 111034, and Armstrong motor number 805316-010: 1/12 HP, 1725 RPM, 115v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor number 111061, and Armstrong motor number 817025-005: 1/6 HP, 1725 RPM, 115v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor numbers 111036 & 111031, and Armstrong motor number 817025-001: 1/6 HP, 1725 RPM, 115v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor number 111040, and Armstrong motor number 817025-007: 1/4 HP, 1725 RPM, 115v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor numbers 169226 & 169038, and Armstrong motor number 816141-002: 1/3 HP, 1725 RPM, 115v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor numbers 111044 & 169228, and Armstrong motor number 811757-001: 1/2 HP, 1725 RPM, 115/208-230v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor numbers 111047 & 169230, and Armstrong motor number 811757-002: 3/4 HP, 1725 RPM, 115/208-230v, 60Hz, single phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

This motor can be used as an alternative to Bell & Gossett motor numbers 169092 &169237, and Armstrong motor number 816678-069: 1-1/2 HP, 1725 RPM,208-230/460v, 60Hz, three phase hot water circulating pump motor with an open drip-proof (ODP) enclosure.

Generic seal kit for B&G pumps with 118844, 189034, 189100, and 186863 bearing assemblies.

Generic seal kit for B&G series 60 pumps with 185261 bearing assemblies.

Generic seal kit for B&G pumps with 185260 bearing assemblies.

Generic seal kit for B&G series 1510 and 1531 pumps with 1-5/8" shafts.

Generic seal kit for B&G series 1510 and 1531 pumps with 1-5/8" shafts.

Generic seal kit for B&G series VSC, sizes 6x6x9, 6x6x12, and all 8x8, as well as, VSCS pumps, sizes 4x5x14, 5x6x15, 6x8x9, 6x8x12, and all 8x8.

Generic seal kit for B&G series VSC, sizes 4x4x9, all 5x5, 6x6x9, and 6x8x9, as well as, VSCS pumps, sizes all 5x6, 6x6x9, and 6x8x9.

Generic seal kit for B&G series VSC, size 10x10x13, and 6x8x9, as well as, VSCS pumps, size 10x12x13.

Generic seal kit for B&G series 1510 and 1531 pumps with 1-1/4" shafts.

Generic seal kit for all new style (-9 featuring serial cartridge design) series 1600 Taco pumps, includes body gasket.

Generic seal kit for Taco series BB, BM, SB, and CC pumps with standard B design.

Generic seal kit for Taco series BB, BM, SB, and CC pumps with standard B design.

Generic seal kit for Taco series BB, BM, SB, and CC pumps with standard B design.

Generic seal kit for Taco series CM, FM, and VL pumps with standard B design.

Generic seal kit for Taco series CM, FM, and VL pumps with standard B design.

Generic seal kit for Taco series CM, FM, and VL pumps with standard E design.

Generic seal kit for Taco series FE pumps with standard E design.

Generic seal kit for Taco series FE pumps with standard D design.

Generic seal kit for Taco series FE pumps with standard D design.

Generic seal kit for Taco series VI pumps with standard E design.

Generic seal kit for Taco series VI pumps with standard E design.

Generic Gylcol seal kit for B&G series 1510 and 1531 pumps, with 1-1/4" shafts, under 10 HP.

Complete repair kit for Bell & Gossett Series 1510 pumps with small bearing frames (1-1/4" shafts). This kit includes all the components (seal kit, shaft sleeve, water slinger, and related gaskets) to ensure a leak-free repair of B&G pumps.