Information
Overview
J.D. Gould 1-1/4" NPT, 120 volt, normally closed, bronze-body solenoid valve for water service with a maximum temperature of 220°F, a maximum hot water pressure of 125 psi and a 5 pound minimum pressure differential. J.D. Gould solenoid valves are activated by a solenoid (electromagnetic) coil, which when energized or de-energized move the core (or piston) to apply pressure against its seat. There are two operations of these valves, either normally open or normally closed. Normally open valves allow flow throughout the valve until the coil is energized to close the valve. Normally closed is sealed until the coil is energized to open the valve. Maximum operating pressure refers to the maximum difference in pressure between the inlet and outlet. Minimum pressure differential is the pressure required to open the valve.
Specifications
Manufacturer | J.D. Gould |
---|---|
Model | M-3V |
Valve Application | Water |
Body Material | Bronze |
Piping Configuration | Straight |
Connection Size | 1-1/4" |
Connection Type | NPT |
Max Pressure | 125 psi WOG |
Literature
- J.D. Gould Type M & M-1 Series Solenoid Valves
- J.D. Gould Solenoid Valves General Installation & Operation
- J.D. Gould Solenoid Valves Capacity Charts
- J.D. Gould Solenoid Valves Flow Detail & Coil Specs
- J.D. Gould Solenoid Valves Typical Uses By Industry
- J.D. Gould Solenoid Valves Cross Reference to Asco Chart
- J.D. Gould Solenoid Valves Cross Reference to Atkomatic Chart