Johnson Controls packing gland nut for 1/2"-2" AV, V, and VB flare valves.

Johnson Controls reconditioning kit for 1-1/4" V-3752 valves, with a CV of 12.0 and in a union angle. This kit includes a stem and disk subassembly, as well as, a bonnet and packing assembly.

Johnson Controls packing nut for V-3800 valves.

Johnson Controls stem and disc assembly for 1/2" V-4332 and VB-4332 flare 3-way mixing valves.

Johnson Controls ring packing kit for valves with V-3000 actuators and with 1/4" stems, includes two ring packs, short stem guide, long stem guide, packing follower, spacer, sleeve, bullet, lubricant capsule, 1" x 2" crocus cloth, and insertion/removal tool.

Johnson Controls averaging cumulator with a maximum supply pressure of 25 psi and an input pressure of 0-20 psi. This low volume device operates a controlled device by averaging the output signals from two, three or four controllers or transmitters.

Johnson Controls rubber boot for pneumatic high torque piston damper actuators.

Johnson Controls humidity display module used with W351 and W351P humidity controls. A three-digit LCD display provides continuous readout of actual humidity sensed by the transmitter.

Johnson Controls replacement spring for D-3073, 3153, and 4073 pneumatic damper actuators.

Johnson Controls replacement spring for D-3244 pneumatic damper actuators.

Johnson Controls replacement spring for D-3246 pneumatic damper actuators.

Johnson Controls plastic wall screw anchors for mounting brackets and wall boxes on thermostats.

Johnson Controls snap-in nylon bushing for 3/4" EMT.

Johnson Controls barb x sweat pneumatic adaptor for plastic to copper in a 5/32" (O.D.) x 3/16" connection size.

Johnson Controls 0-30 psi air pressure gauge with a 1-1/2" dial face and 1/8" center back mounted stem.

Johnson Controls screw-in air pressure gauge with 1-1/2" dial face and center back mount stem for calibration. This gauge is a complete control line test gauge and adaptor.

Johnson Controls hypodermic needle test probe for H-4100 humidistats.

Johnson Controls system simulator and calibration kit that can be used to check out and calibrate room thermostats (T-4000 series) and receiver-controllers (T-5800 series).

Johnson Controls terminal replacement block kit for M-9100 series electric motor damper actuators.

Johnson Controls miniature pressure regulator, with 12 psi output pressure, that provides a method to readjust the set point of pneumatic controllers in low volume applications.

Johnson Controls miniature pressure regulator, with a 1-6 psi output pressure range, that provides a method to readjust the set point of pneumatic controllers in low volume applications.

Johnson Controls temperature stage module, with SPDT relay output and 1-30°F adjustment, for use with S350 series temperature controls to add multiple stage capability.

Johnson Controls humidity stage module with SPDT output relay and 2-10% relative humidity. This humidistat is used with W351 series humidity controls to add multiple stage capability.

Johnson Controls potentiometer kit for M100 series actuators.

Johnson Controls aspirator wall box kit for concealed mounted thermostats without push buttons.

Johnson Controls set point label card for identifying T-4000 control functions. (10-Pack)

Johnson Controls beige plastic horizontal or vertical cover, without nameplate, thermometer, or set point, for H-4100 and H-5100 series humidity instruments.

Johnson Controls beige plastic horizontal cover, without nameplate, for H-4100 and H-5100 series humidity instruments. This cover includes a thermometer and has one set point window.

Johnson Controls terminal connector, with two straight fittings for plug-in connection to 5/32" O.D. polyethylene tubing.

Johnson Controls terminal connector, with angle fittings for surface mounted thermostats with exposed tubing.

Johnson Controls restricted adjustment pins (100 in kit min) that restrict adjustment of the set point dial.

Johnson Controls cover for ground plate or metal wall box that keeps dirt out during construction.

Johnson Controls adjustment knob kit for external set point adjustment (pack of 10).

Johnson Controls external horizontal set point dial. The T-4002-5017 accessory kit includes a dial, a pointer, and a dial holding screw (captivated in dial).

Johnson Controls external vertical set point dial. The T-4002-5018 accessory kit includes a dial, a pointer, and a dial holding screw (captivated in dial).

Johnson Controls metal wall box for rough-in of H-4100 surface mounted thermostats in masonry.

Johnson Controls terminal connector, with three straight fittings, for plug-in connection to 5/32" O.D. polyethylene tubing.

Johnson Controls pneumatic proportional receiver-controller that directly controls dampers, valves, and other devices. It produces a proportional 3 to 15 psi pressure signal from a remotely located transmitter.

Johnson Controls pneumatic, two-position proportional receiver-controller that directly controls dampers, valves, and other devices. It produces a proportional 3 to 15 psi pressure signal from a remotely located transmitter.

Johnson Controls 50-100°F dial for T-5312 pneumatic receiver-controllers.

Johnson Controls 10-60% and 30-80% relative humidity dial for T-5312 pneumatic receiver-controllers.

Johnson Controls 60-85°F and 40-65°F dial for T-5312 pneumatic receiver-controllers.

Johnson Controls 40-240°F dial for T-5312 pneumatic receiver-controllers.

Johnson Controls -40 to +160°F dial for T-5312 pneumatic receiver-controllers.

Johnson Controls pneumatic receiver-controller that is designed for use with remote temperature, pressure, or humidity transmitters to provide precise control of pneumatic devices. This controller is adjustable from 0.5 to 15:1 at 10:1 air consumption and at 45 SCIM.

Johnson Controls pneumatic receiver-controller that is designed for use with remote temperature, pressure, or humidity transmitters to provide precise control of pneumatic devices. This controller is adjustable from 0.5 to 15:1 at 5:1 air consumption and at 60 SCIM.

Johnson Controls pneumatic receiver-controller that is designed for use with remote temperature, pressure, or humidity transmitters to provide precise control of pneumatic devices. This controller is adjustable from 0.5 to 15:1 at 10:1 air consumption and at 60 SCIM.

Johnson Controls pneumatic receiver-controller that is designed for use with remote temperature, pressure, or humidity transmitters to provide precise control of pneumatic devices. This controller is adjustable from 0.5 to 15:1 at 5:1 air consumption and at 75 SCIM.

Johnson Controls time delay which adjusts times, allowing the system to approach the control point before the T-5800 pneumatic receiver-controller takes over.

Johnson Controls input and output connectors for T-5800 pneumatic receiver-controllers.