Bradley eye wash faucet.

Universal faucet (spout) mounted eye-wash. Valve body has a pull knob to activate the flow, and 55/64"-27 female thread along with (3) spout adapters. Outlet heads are 5" apart with protective covers.

Universal faucet (spout) mounted eye-wash. Valve body has a pull knob to activate the flow, and 55/64"-27 female thread along with (3) spout adapters. Outlet heads are 3" apart with protective covers.

Portable 16 gallon eye-wash. Rugged plastic tank with handle, that can be mounted on the wall or set on a counter.

Wall mount eye wash with two FS spray heads and flip-top dust covers. 11-1/2" diameter stainless steel bowl with 1-1/4" drain outlet. Flag handle 1/2" stay open ball valve.

Pedestal mount eye wash with two FS spray heads and flip-top dust covers. 11-1/2" diameter stainless steel bowl with 1-1/4" drain outlet. Flag handle 1/2" stay open ball valve. 36" tall with 9" base.

Wall mount eye wash with two FS spray heads and flip-top dust covers. Less bowl and drain. Flag handle 1/2" stay open ball valve.

Deck mount eye wash with two FS spray heads and flip-top dust covers. Mounts to the right side of the sink and swings over the sink to activate the water flow.

Deck mount eye wash with two GS spray heads and flip-top dust covers. Mounts to the right side of the sink and swings over the sink to activate the water flow.

Deck mount eye wash with two GS spray heads and flip-top dust covers. Mounts to the left side of the sink and swings over the sink to activate the water flow.

Deck mount eye wash with two GS spray heads and flip-top dust covers. Mounts to the right side of the sink and swings over the sink. Flag handle 1/2" stay open ball valve.

Deck mount eye wash with two GS spray heads and flip-top dust covers. Mounts to the left side of the sink and swings over the sink. Flag handle 1/2" stay open ball valve.

Wall mount eye wash with two GS spray heads and flip-top dust covers. 11-1/2" diameter stainless steel bowl with 1-1/4" drain outlet. Flag handle 1/2" stay open ball valve.

Wall mount eye wash with two GS spray heads and flip-top dust covers. 11-1/2" diameter orange ABS plastic bowl with 1-1/4" drain outlet. Flag handle 1/2" stay open ball valve.

Wall mount eye wash with two GS spray heads and flip-top dust covers. Less bowl and drain. Flag handle 1/2" stay open ball valve.

Pedestal mount eye wash with two GS spray heads and flip-top dust covers. 11-1/2" diameter stainless steel bowl with 1-1/4" drain outlet. Flag handle 1/2" stay open ball valve. 36" tall with 9" base.

Pedestal mount eye wash with two GS spray heads and flip-top dust covers. 11-1/2" diameter stainless steel bowl with 1-1/4" drain outlet. Foot and hand flag handle 1/2" stay open ball valve. 36" tall with 9" base.

Guardian tempering valve for eye wash units with a flow capacity of 0.5 to 6 GPM, fail safe bypass, and thermostatic control that blends water to 85°F with high limit stop at 90°F. It also featurs a dial thermometer to monitor outlet temperature.

• Repair Parts (2)

Leonard Valve emergency water mixing valve for eye/face wash units with full a 1/2" inlet and 1/2" top outlet. The valve's DURA-trol solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations.

• Repair Parts (2)

Stingray Systems wall-mounted eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has no filter and features a first aid red ABS bowl.

Stingray Systems wall-mounted barrier-free eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has no filter and features a first aid red ABS bowl.

Stingray Systems wall-mounted eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has no filter and features a stainless steel bowl.

Stingray Systems wall-mounted barrier-free eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has no filter and features a stainless steel bowl.

Stingray Systems floor-mounted emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features both an ABS bowl and showerhead.

Stingray Systems floor-mounted, barrier-free emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features both an ABS bowl and showerhead.

Stingray Systems floor-mounted emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features an ABS bowl and stainless steel showerhead.

Stingray Systems floor-mounted, barrier-free emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features an ABS bowl and stainless steel showerhead.

Stingray Systems floor-mounted emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features a stainless steel bowl and ABS showerhead.

Stingray Systems floor-mounted, barrier-free emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features a stainless steel bowl and ABS showerhead.

Stingray Systems floor-mounted emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features both a stainless steel bowl and showerhead.

Stingray Systems floor-mounted, barrier-free emergency shower and eye/face wash with 1" NPT female connections for inlet and pipe draining. This system has a galvanized pipe finish, no filter, and features both a stainless steel bowl and showerhead.

Lawler low flow capacity emergency mixing valve for eye/facewash and eyewash units with a temperature range of 70-90°F and a 1/2" NPT inlet. This valve has a maximum inlet pressure of 125 psi, a recommended supply pressure of 60 psi, and a recommended inlet temperature of 120°F. It also contains a by-pass in order to provide cold water in the event of a thermostatic failure. It's GPM range is 2-7 GPM at 30 psi.

• Repair Parts (6)

Lawler mid capacity emergency mixing valve for drench showers and eye/facewash units with a temperature range of 70-90°F and 1-1/4" NPT inlets and outlets. This valve has a maximum inlet pressure of 125 psi, a recommended operating pressure of 65 psi, and a recommended inlet temperature of 120°F. It contains an integral cold water bypass. It's GPM range is 2-25 GPM at 30 psi. 911E valves can be installed into existing emergency shower applications.

• Repair Parts (2)

Powers HydroGuard XP 1/2" NPT emergency tempering valve with cold water bypass. This valve has a temperature adjustment range of 60-95°F. It features a vandal-resistant locking mechanism, checkstops, and 6.5 GPM bypass flow rate at 30 psi.

• Repair Parts (6)

Speakman Eyesaver eyewash/drench hose attachment for use with SC-5811-RCP service sink faucets. This drench hose features a 6' stainless steal supply hose, integral vacuum breaker, check valve, and two yellow plastic spray heads. 3.06 gpm at 30 psi (eyewash only) or 2.66 gpm at 30 psi (with sink on).

Speakman Eyesaver service sink faucet with eyewash/drench hose. This unit contains a SC-5811-RCP service sink and SEF-9200 drench hose. It features a 6' stainless steal supply hose, integral vacuum breaker, check valve, and two yellow plastic spray heads.

Speakman Eyesaver single post laboratory faucet with integrated eyewash. It features dual aerated spray heads with flip top caps and is activated by a lift handle.

Speakman Eyesaver laboratory widespread faucet with integrated eyewash. It features dual aerated spray heads with flip top caps and is activated by a pull handle.

Speakman countertop-mounted combination eyewash and drench hose that features twin aerated, yellow plastic spray outlets with dust cap and an automatic flow control. This unit also has a 6' reinforced hose (750 psi burst pressure) and a 3/8" NPT female brass, chrome-plated self-closing valve with stay-open feature.

Speakman laboratory countertop-mounted eyewash. It features dual aerated spray heads with flip top caps and is activated by a push handle. 3.09 gpm at 30 psi.

Speakman laboratory countertop-mounted swing-activated eyewash. It features dual aerated spray heads with flip top caps. 3.06 gpm at 30 psi.

Speakman GravityFlo 9-gallon portable, gravity-operated eyewash with pull-down activation. Bracket included for shelf, table, or wall mounting.

Speakman Optimus combination shower and eye/face wash system. This system features dual aerated eyewash, two individual face pads producing 66 individual, full-coverage sprays, and an emergency shower with 8 inch diameter yellow plastic shower head. The pipe fittings can be customized to meet ADA height specifications.

Speakman Optimus pedestal-mounted eye and face wash system. This system features dual aerated eyewash, two individual face pads producing 66 individual, full-coverage sprays, and a 1-1/4" diameter steel pedestal.

Speakman Optimus wall-mounted eye and face wash bowl that features dual aerated eyewash, two individual face pads producing 66 individual, full-coverage sprays, and 1/2" NPT female brass, chrome-plated, full flow stay-open ball valve.

Haws replacement bottle of the 1000 ml sterile saline solution for personal emergency eye washes. Fluid carries a 3 year shelf life. Store at room temperature 41-95°F.

Guardian pedestal (floor)-mounted eye/face wash with stainless steel bowl, and hand and foot controls (flag handle or foot treadle). Each sprayhead has a "flip top" dust cover, internal flow control, and filter to remove impurities from the water flow. This fixture has a 1/2" IPS chrome plated brass stay-open ball valve, 1/2" NPT female inlet supply, and a 1-1/4" NPT female outlet.

Guardian pedestal (floor)-mounted eye wash with plastic bowl. Each sprayhead has a "flip top" dust cover, internal flow control, and filter to remove impurities from the water flow. This fixture has a 1/2" IPS chrome plated brass stay-open ball valve, 1/2" NPT female inlet supply, and a 1-1/4" NPT female outlet.

Guardian wall-mounted eye/face wash with stainless steel bowl and cover. Each sprayhead has an internal flow control and filter to remove impurities from the water flow. This fixture has a 1/2" IPS chrome plated brass stay-open ball valve, 1/2" NPT female inlet supply, and a 1-1/4" NPT female outlet.

Guardian deck-mounted, auto-flow, 90° swing down eye wash. The spray heads swing down from storage to operational position, activating water flow. Each sprayhead has an internal flow control and filter to remove impurities from the water flow. This fixture has a 1/2" IPS plug-type valve with PTFE coated o-ring seals and 1/2" NPT female inlet supply.