BrassCraft chrome plated straight-pattern 1/4 turn supply stop - 1/2" Nom Compression x 3/8" OD Compression.

BrassCraft chrome plated angle-pattern 1/4 turn supply stop - 1/2" Nom Compression x 3/8" OD Compression.

BrassCraft chrome plated straight-pattern 1/4 turn supply stop - 3/8" F.I.P. x 3/8" OD Compression.

BrassCraft chrome plated straight-pattern 1/4 turn supply stop - 1/2" F.I.P. x 3/8" OD Compression.

BrassCraft chrome plated angle-pattern 1/4 turn supply stop - 3/8" F.I.P. x 3/8" OD compression.

BrassCraft chrome plated angle-pattern 1/4 turn supply stop - 1/2" F.I.P. x 3/8" OD Compression.

Brasscraft chrome plated dual angle-pattern supply stop with two 3/8" OD compressions and 1/2" IPF inlets.

Bradley brass plug for check on S60-003 combination stop, check and strainer valve for circular washfountains.

Bradley Celcon plastic and rubber stop assembly for circular washfountains.

Bradley stop strainer and check valve repair kit, which includes a strainer, spring, washer, o-ring, and check valve.

Bradley stop strainer and check valve kit that allows water to be turned off at the unit, strains the water for impurities, and allows water to flow in only one direction and not back flow.

Chicago Faucet straight stop fitting with a 1/2" inlet and 3" cross handle.

Chicago Faucet straight stop fitting with a 1/2" inlet and 2-1/4" tee handle.

Polished chrome, 3/4" female inlet/outlet, straight through pattern stop valve with cross handle.

Polished chrome, 3/4" female inlet/outlet, straight through pattern stop valve with loose key handle and lock shield cap.

Stopper & O-ring for valve stem on Chicago Faucet lever & twist drains.

Delta stopper only for pop-up drain assemblies.

Sloan Valve 1" screwdriver stop repair kit for H-440 and H-445. This kit includes shield, packing disc, stem, rubber plug, and packing ring.

Sloan Valve 3/4" bumper stop cap.

Sloan Valve 1" and 3/4" screwdriver stop repair kit for H-40 and H-45.

Sloan Valve 1" and 3/4" wheel handle stop repair kit for H-40 and H-45.

Sloan Valve 3/4" screwdriver stop repair kit for H-440.

Sloan Valve control stop repair kit for use with 3/4" H-600-A screwdriver control stops, including a spring and control stops. This kit replaces all the internal components of the stop valve. The rubber bumper is spring loaded to act as a check valve. A straight blade screwdriver will open and close the valve. This kit also repairs 3/4" H-540-A (with H-37 cap) Back Check screwdriver control stops.

Sloan Valve control stop repair kit for use with 1" and 3/4" H-700-A and 1" H-600-A Back Check screwdriver control stops. This kit replaces all the internal components of the stop valve. The rubber bumper is spring loaded to act as a check valve. A straight blade screwdriver will open and close the valve. This kit also repairs 3/4" and 1" H-740, as well as, 1" H-540.

Sloan Valve wheel handle stop repair kit, including stop and washer.

Sloan Valve wheel handle stop repair kit for 1" H-600 and all H-700.

Sloan Valve wheel handle stop repair kit for 3/4" H-600.

Sloan Valve vandal resistant cap kit for 3/4" H-600-A Bak Chek screwdriver control stops.

Sloan Valve vandal resistant cap kit for 1" and 3/4" H-700-A and 1" H-600-A Bak Chek screwdriver control stops.

Sloan Valve stop tail o-ring with a 1-3/8" diameter that fits into a groove on the flushometer tailpiece. The tailpiece with the o-ring then slides into the control stop, where the o-ring creates a watertight seal. It is recommended that you replace this o-ring each time you loosen the connection.

Sloan Valve 1" bumper stop cap designed for use with H-700-A and H-600-A BakChek screwdriver control stops.

Sloan Valve extended stop bumper stop with cap for se with 1" and 3/4" H-700-A and 1" H-600-A Bak Chek screwdriver control stops.

Sloan Valve control stop cap for use with 3/4" H-600-A Bak Chek screwdriver control stops.

Sloan Valve locking stop cap designed for use with H-700-A (1" and 3/4") and H-600-A (1") Bak-Chek screwdriver control stops.

Sloan Valve 3/4" back-check screwdriver stop.

Sloan Valve 1" back-check screwdriver stop.

Sloan Valve 3/4" vandal-resistant ground joint screwdriver stop.

Sloan Valve 3/4" vandal-resistant ground joint screwdriver stop.

Sloan Valve 3/4" adjustable screwdriver stop.

Sloan Valve 1" adjustable screwdriver stop.

Sloan Valve 3/4" ground joint screwdriver stop.

Sloan Valve 1" ground joint screwdriver stop.

Sloan Valve adjustable 1" screwdriver stop with short bumper.

Sloan Valve 1" ground joint screwdriver stop with short bumper.

Sloan Valve adjustable 1" screwdriver stop with extended bumper.

Sloan Valve 1" screwdriver stop with extended bumper.

Sloan Valve 3/4" rough brass adjustable wheel handle stop.

Sloan Valve 1" rough brass adjustable wheel handle stop.

Sloan Valve 1" rough brass ground joint wheel handle stop.

Sloan Valve 3/4" rough brass ground joint wheel handle stop.