
PPP SC-500A - 1/2" NPT Water Hammer Arrestor
PPP 1/2" NPT threaded, brass water hammer arrestor with a 60 psi nitrogen pre-load for 1-11 fixture units.
(877) 775-7705 ~ We're currently open! Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
PPP 1/2" NPT threaded, brass water hammer arrestor with a 60 psi nitrogen pre-load for 1-11 fixture units.
PPP 3/4" NPT threaded, brass water hammer arrestor with a 60 psi nitrogen pre-load for 12-32 fixture units.
PPP 1" NPT threaded, brass water hammer arrestor with a 60 psi nitrogen pre-load for 33-60 fixture units.
Every Flood Buzz™ product works in the same basic way. When water from a leak touches the two metal prongs on the bottom of a Flood Buzz™ water leak alarm, the water closes the circuit and the Flood Buzz™ emits a loud piercing screech. There are no moving parts, no extra components to break, nothing unnecessary. Just a lean, mean, water leak-detecting machine that will save you from the damaging and expensive consequences of undetected water leaks. All Flood Buzz™ products come with an internal non-serviceable battery already installed. All you have to do is take the Flood Buzz™ out of its wrapper and place it near or next to all potential leak locations such as under sinks, next to appliances, in air-conditioner condensate pans, near sump pumps, in effect, everywhere there’s water within the home.