
Ridgid 32870 - Model 42A Heavy Duty Pipe Cutter 3/4"-2"
Ridgid heavy duty hand-held 4-wheel pipe cutter for 3/4"- 2" pipe. This cutter features a short shank for tight areas and an extra large handle.
ATTN: Small pack shipments are experiencing 2-3 day carrier delays. If you choose to ship LTL, choose priority for more reliable delivery times.
(877) 775-7705 ~ Sorry, we're closed. Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
Ridgid heavy duty hand-held 4-wheel pipe cutter for 3/4"- 2" pipe. This cutter features a short shank for tight areas and an extra large handle.
Ridge 12R series die head complete with 4 dies for 1/8"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 1/4"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 3/8"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 1/2"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 3/4"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 1"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 1-1/4"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 1-1/2"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series die head complete with 4 dies for 2"NPT threading. Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 1/8"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 1/4"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 3/8"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 1/2"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 3/4"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 1"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 1-1/4"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 1-1/2"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge 12R series dies only for 2"NPT die head. Set of (4). Right hand alloy North American Standard pipe thread.
Ridge universal dies only for 1/2" and 3/4"NPT machine universal die head. Right hand alloy pipe thread used on 504A, 711, 713, 811A and 842 die heads. Set of (4).
Ridge universal dies only for 1" through 2"NPT machine universal die head. Right hand alloy pipe thread used on 504A, 711, 713, 811A and 842 die heads. Set of (4).
Ridge universal dies only for 1/8"NPT machine universal die head. Right hand alloy pipe thread used on 504A, 711, 713, 811A and 842 die heads. Set of (4).
Ridge universal dies only for 1/4" and 3/8"NPT machine universal die head. Right hand alloy pipe thread used on 504A, 711, 713, 811A and 842 die heads. Set of (4).
Ridge 418 oiler includes bucket with removable chip tray, 54" hose with hand operated trigger pumping handle and 1 gallon of cutting oil. The cutting oil is added to the bucket, then pumped as needed to the threading surface. The excess oil then drips into the pan through a double filtered screen and returns to the reservoir. 15" diameter x 8"deep. weight of 20lbs with oil.
Ridge number 46 pipe support adjusts from 23" to a height of 33". Handles pipe to 6" diameter, weight of 23lbs.
Ridge 12R ratchet and handle for hand threading pipe from 1/8" through 2" NPT. 12R die heads snap into place and a twist knob on the side of the ratchet can be turned to thead and then to back off the pipe.
Ridge 2S hand pipe reamer is used on 1/4" through 2" pipe to remove internal burrs after cut is made. Self-feeding spiral design for fast and easy reaming. Ratcheting head for reaming and removing.
Ridge 460 Tri-Stand chain vise for 1/8" through 6"pipe. This pipe stand and vise allow pipe to be cut, threaded and bent with its large base and integral legs that fold into and easy carrying unit. Weight of 47lbs.
Ridgid model 40A tri-stand yoke vise for 1/8" through 2-1/2" pipe. This pipe stand and vise allow pipe to be cut, threaded, and bent with its large base and integral legs that fold into and easy carrying unit.
Ridgid model 39 portable yoke vise for 1/8" through 2" pipe. This portable bench clamp vise holds pipe for cutting and threading.
Ridge F515 pipe cutter wheel for steel and ductile iron furnished on original cutters number 3S and 4S.
Ridge F367 pipe cutter wheel for steel and ductile iron furnished on original cutters number 208, 209 and 6S.
Ridge F3 pipe cutter wheel for steel and ductile iron furnished on original cutters number 42A. Must purchase full package of 12.
Ridge E1240 tubing cutter wheel for aluminum, copper, and mild steel, furnished on original cutters number 10,15 and 20HD.
Ridge E3469 tubing cutter wheel for aluminum and copper, furnished on original cutters number 50, 103, 104, 109P, 131P, 151P, 133 and 153.
Ridgid 5/16" x 25' sink/sectional cable with bulb auger.
Ridgid 5/16" x 50' sink/sectional cable with bulb auger.
Ridgid model 300 power drive complete with 811A quick-opening die head, 344 Reamer, 360 pipe cutter, one set of four (4) 1/2" and 3/4" universal dies, one set of four (4) 1"-2" universal dies, and 1 gallon of cutting oil.
Ridge model 300 power drive only. Ridgid's model 300 power drive features a lightweight, portable design, self-contained oil system, 1/2 HP 115 volt motor with foot switch motor control with forward/off/reverse operation, spindle speed of 38 RPM, and is approved to UL standards.
Ridgid model 1206 tri-stand with tray to hold model 300 power drives.
Ridgid model 811A quick-opening universal die head (less dies) used on the following model power drives: 300, 535, and 1215. This die head accepts SKUs RG1098 1/2"-3/4" NPT and RG1100 1"-2" NPT dies.
Ridgid model 311 carriage with lever that holds the universal die heads, pipe cutter, and reamer for model 300 power drives.
Ridgid model 360 pipe cutter that fits onto model 311 carriages for model 300 power drives.
Ridgid model 341 reamer fits onto model 311 carriages for model 300 power drives.
Ridgid heel jaw and pin assembly for 6" pipe wrenches.
Ridgid heel jaw and pin assembly for 8" pipe wrenches.
Ridgid heel jaw and pin assembly for 10" pipe wrenches.
Ridgid heel jaw and pin assembly for 12" and 14" pipe wrenches.
Ridgid heel jaw and pin assembly for 18" pipe wrenches.
Ridgid heel jaw and pin assembly for 24" pipe wrenches.
Page 1 of 2