Barber Colman diaphragm for MK-2690 pneumatic valve actuators.

Barber Colman integral packing and cartridge for 1/2" to 2" VB-7XXX and 1/2" to 1-1/4" VB-9XXX valves.

Barber Colman 9" pneumatic diaphragm for MK-6600, MK-6700, MK-6800, MK-6900, MK-8800, and MK-8900 Series valves.

Barber Colman 1/2" valve repair kit.

Barber Colman valve packing kit, containing a packing nut and gland assembly.

Barber Colman 1/2" valve repair kit for VB-721X valves with 1.3 cv.

Barber Colman rolling diaphragm for MK-8XXX valves.

Barber Colman high temp diaphragm for MK-46XX valves.

Barber Colman 1-1/4" valve repair kit for VB-7313 valves.

Barber Colman valve packing kit, containing a packing nut and gland assembly.

Barber Colman adapter fittings kit for TK Series.

Erie (Schneider Electric) PopTop 1/2" sweat female tube & nut inverted flare fitting.

Erie (Schneider Electric) PopTop 3/4" sweat female tube & nut inverted flare fitting.

Erie (Schneider Electric) PopTop 1" sweat female tube & nut inverted flare fitting.

Barber Colman proportional control, spring return, linear movement, pneumatic valve actuator for 3-6 psi. This actuator has a 1/8" NPT connection, a 1/2" nominal stroke, and a NEMA 1 enclosure.

Barber Colman proportional control, spring return, linear movement, pneumatic valve actuator (over 50 square inch) for 3-8 psi. This actuator has a 1/8" NPT connection, a 1/2" nominal stroke, and a NEMA 1 enclosure.

Barber Colman 24V, spring-return, two-position valve actuator.

Barber Colman 120V, spring-return, 2-15 Vdc valve actuator.

Barber Colman 120V, spring-return, two-position valve actuator.

Barber Colman proportional control, spring return, linear movement, pneumatic valve actuator for 5-10 psi. This actuator has a 1/8" NPT connection and a 1/2" nominal stroke.

Barber Colman proportional control, spring return, linear movement, pneumatic valve actuator (over 50 square inch) for 8-13 psi. This actuator has a 1/8" NPT air connection, a 1" nominal stroke, and a NEMA 1 enclosure.

Barber Colman proportional, direct-acting one-pipe thermostat without dial limit stops.

Barber Colman 2-pipe direct acting pneumatic thermostat for a temperature range of 55-85°F. This thermostat is used for proportional control of pneumatically activated valves, dampers, and similar devices in heating, ventilating, and air conditioning systems.

Barber Colman reverse-acting, two-pipe thermostat for temperatures between 55-85°F without dial limit stops.

Barber Colman direct-acting, two-pipe thermostat for temperatures between 55-85°F without dial limit stops.

Barber Colman 120V, two-position, spring-return damper actuator with 60 lb-in torque and 170' stroke.

Barber Colman low temperature thermostat with a setpoint range of 35-60°F, low temperature auto reset, and a SPDT electrical switch. This thermostat is for use in air conditioning or refrigeration systems.

Barber Colman 1/2" NPT, 2-way ball valve featuring 2.6 cv and a bronze body with brass trim and linkage.

Erie (Schneider Electric) seasonal changeover snap-acting SPDT strap on switch with 36" leads.

Erie (Schneider Electric) seasonal changeover snap-acting SPDT strap on switch (that opens at 83°F and closes at 60°F) with 36" leads and conduit connection.

Barber Colman diaphragm for MK-4XXX Series damper actuators.

Barber Colman replacement mounting kit that allows for quick and easy replacement of competitive devices with a new TAC Pneumatic Thermostat.

Barber Colman diaphragm for MK-7XXX Series temperature controllers.

Barber Colman diaphragm for MK-3 Series.

Erie (Schneider Electric) medium-duty, 24VAC, spring return, two-position motor damper actuator with direct drive, CW rotation, and 55 in-oz torque rating. 453H actuators use a two-wire thermostat control.

Erie (Schneider Electric) 24V, 50/60Hz, replacement spring return two-position motor for Erie Classic G and L dampers rated class "F" (and manufactured before January 2003).

Erie (Schneider Electric) 110/120V, 50/60Hz, replacement spring return two-position motor for Erie Classic G and L dampers rated class "F" (and manufactured before January 2003).

Erie (Schneider Electric) 277V, 50/60Hz, replacement spring return two-position motor for Erie Classic G and L dampers rated class "F" (and manufactured before January 2003).

Erie (Schneider Electric) 24V, 50/60Hz, replacement spring return two-position motor for Erie PopTop dampers rated class "F".

Erie (Schneider Electric) 110/120V, 50/60Hz, replacement spring return two-position motor for Erie PopTop dampers rated class "F".

Erie (Schneider Electric) 277V, 50/60Hz, replacement spring return two-position motor for Erie PopTop dampers rated class "F".

Erie (Schneider Electric) 24VAC, spring return, normally-closed, two-position motor actuator with 6" motor wires.

Erie (Schneider Electric) 24VAC, spring return, normally-closed, two-position motor actuator with terminal block and end switch.

Erie (Schneider Electric) 24VAC, spring return, normally-closed, two-position motor actuator with 18" wire leads.

Erie (Schneider Electric) 24VAC, spring return, normally-closed, two-position motor actuator with 18" wire leads and end switch.

Erie (Schneider Electric) 24VAC, spring return, normally-closed, two-position motor actuator with 3' appliance cable.

Erie (Schneider Electric) 24VAC, spring return, normally-closed, two-position motor actuator with 96" wire leads.

Erie (Schneider Electric) 120VAC, spring return, normally-closed, two-position motor actuator with 6" motor wires.

Erie (Schneider Electric) 120VAC, spring return, normally-closed, two-position motor actuator with 18" wire leads.

Erie (Schneider Electric) 120VAC, spring return, normally-closed, two-position motor actuator with 18" wire leads and end switch.