Sloan Valve 1" screwdriver stop repair kit for H-440 and H-445. This kit includes shield, packing disc, stem, rubber plug, and packing ring.

Sloan Valve 3/4" bumper stop cap.

Sloan Valve 1" and 3/4" screwdriver stop repair kit for H-40 and H-45.

Sloan Valve 1" and 3/4" wheel handle stop repair kit for H-40 and H-45.

Sloan Valve 3/4" screwdriver stop repair kit for H-440.

Sloan Valve control stop repair kit for use with 3/4" H-600-A screwdriver control stops, including a spring and control stops. This kit replaces all the internal components of the stop valve. The rubber bumper is spring loaded to act as a check valve. A straight blade screwdriver will open and close the valve. This kit also repairs 3/4" H-540-A (with H-37 cap) Back Check screwdriver control stops.

Sloan Valve control stop repair kit for use with 1" and 3/4" H-700-A and 1" H-600-A Back Check screwdriver control stops. This kit replaces all the internal components of the stop valve. The rubber bumper is spring loaded to act as a check valve. A straight blade screwdriver will open and close the valve. This kit also repairs 3/4" and 1" H-740, as well as, 1" H-540.

Sloan Valve wheel handle stop repair kit, including stop and washer.

Sloan Valve wheel handle stop repair kit for 1" H-600 and all H-700.

Sloan Valve wheel handle stop repair kit for 3/4" H-600.

Sloan Valve vandal resistant cap kit for 3/4" H-600-A Bak Chek screwdriver control stops.

Sloan Valve vandal resistant cap kit for 1" and 3/4" H-700-A and 1" H-600-A Bak Chek screwdriver control stops.

Sloan Valve stop tail o-ring with a 1-3/8" diameter that fits into a groove on the flushometer tailpiece. The tailpiece with the o-ring then slides into the control stop, where the o-ring creates a watertight seal. It is recommended that you replace this o-ring each time you loosen the connection.

Sloan Valve 1" bumper stop cap designed for use with H-700-A and H-600-A BakChek screwdriver control stops.

Sloan Valve extended stop bumper stop with cap for se with 1" and 3/4" H-700-A and 1" H-600-A Bak Chek screwdriver control stops.

Sloan Valve control stop cap for use with 3/4" H-600-A Bak Chek screwdriver control stops.

Sloan Valve locking stop cap designed for use with H-700-A (1" and 3/4") and H-600-A (1") Bak-Chek screwdriver control stops.

Sloan Valve 3/4" back-check screwdriver stop.

Sloan Valve 1" back-check screwdriver stop.

Sloan Valve 3/4" vandal-resistant ground joint screwdriver stop.

Sloan Valve 3/4" vandal-resistant ground joint screwdriver stop.

Sloan Valve 3/4" adjustable screwdriver stop.

Sloan Valve 1" adjustable screwdriver stop.

Sloan Valve 3/4" ground joint screwdriver stop.

Sloan Valve 1" ground joint screwdriver stop.

Sloan Valve adjustable 1" screwdriver stop with short bumper.

Sloan Valve 1" ground joint screwdriver stop with short bumper.

Sloan Valve adjustable 1" screwdriver stop with extended bumper.

Sloan Valve 1" screwdriver stop with extended bumper.

Sloan Valve 3/4" rough brass adjustable wheel handle stop.

Sloan Valve 1" rough brass adjustable wheel handle stop.

Sloan Valve 1" rough brass ground joint wheel handle stop.

Sloan Valve 3/4" rough brass ground joint wheel handle stop.

Sloan Valve 3/4" adjustable wheel handle stop.

Sloan Valve 3/4" ground joint wheel handle stop.

Sloan Valve 3/4" ground joint wheel handle stop.

Sloan Valve 1" ground joint wheel handle stop.

Sloan Valve 3/4" vandal-resistant adjustable screwdriver stop.

Sloan Valve 1" vandal-resistant adjustable screwdriver stop.

Sloan Valve 1" control stop repair kit.

Sloan Valve 3/4" control stop repair kit.

Sloan Valve concealed wheel handle repair kit.

Sloan Valve 1" vandal-resistant ground joint screwdriver straight stop.

Sloan Valve 1" ground joint screwdriver straight stop.

Sloan Valve 1" rough brass ground joint wheel handle straight stop.

Sloan Valve 1" ground joint wheel handle straight stop.