(877) 775-7705 ~ Sorry, we're closed. Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
Spirax-Sarco FTI Series F&T steam traps are traditional cast iron traps with in-line connections. These traps are offered for steam pressures up to 200 psig and condensate loads to 10,000 lb/hr. Their stainless steel air vent, float, and valve eliminate air binding, resist corrosion, and allow for continuous drainage of condensate.
Spirax-Sarco float and thermostatic steam trap, model FTI-15, with a 1/2" trap connection in an in-line horizontal configuration. The FTI-15 is cast iron and has a 15 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-15, with a 3/4" trap connection in an in-line horizontal configuration. The FTI-15 is cast iron and has a 15 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-15, with a 1" trap connection in an in-line horizontal configuration. The FTI-15 is cast iron and has a 15 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-30, with a 1/2" trap connection in an in-line horizontal configuration. The FTI-30 is cast iron and has a 30 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-30, with a 3/4" trap connection in an in-line horizontal configuration. The FTI-30 is cast iron and has a 30 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-30, with a 1" trap connection in an in-line horizontal configuration. The FTI-30 is cast iron and has a 30 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-75, with a 1/2" trap connection in an in-line horizontal configuration. The FTI-75 is cast iron and has a 75 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-75, with a 3/4" trap connection in an in-line horizontal configuration. The FTI-75 is cast iron and has a 75 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-75, with a 1" trap connection in an in-line horizontal configuration. The FTI-75 is cast iron and has a 75 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-125, with a 1/2" trap connection in an in-line horizontal configuration. The FTI-125 is cast iron and has a 125 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-125, with a 3/4" trap connection in an in-line horizontal configuration. The FTI-125 is cast iron and has a 125 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-125, with a 1" trap connection in an in-line horizontal configuration. The FTI-125 is cast iron and has a 125 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-200, with a 1/2" trap connection in an in-line horizontal configuration. The FTI-200 is cast iron and has a 200 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-200, with a 3/4" trap connection in an in-line horizontal configuration. The FTI-200 is cast iron and has a 200 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-200, with a 1" trap connection in an in-line horizontal configuration. The FTI-200 is cast iron and has a 200 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-15, with a 1-1/2" trap connection in a straight through piping configuration. The FTI-15 is cast iron and has a 15 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-30, with a 1-1/2" trap connection in a straight through piping configuration. The FTI-30 is cast iron and has a 30 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-75, with a 1-1/2" trap connection in a straight through piping configuration. The FTI-75 is cast iron and has a 75 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-125, with a 1-1/2" trap connection in a straight through piping configuration. The FTI-125 is cast iron and has a 125 psi maximum operating pressure.
Spirax-Sarco float and thermostatic steam trap, model FTI-200, with a 1-1/2" trap connection in a straight through piping configuration. The FTI-200 is cast iron and has a 200 psi maximum operating pressure.
This video highlights the different models of Spirax-Sarco steam traps.
