We will be closing at 12pm CST on Friday, April 10th. We hope you enjoy the holiday weekend.
Will Call Restrictions: Due to the COVID-19 outbreak and Minnesota's "Stay at Home" executive order, only high priority, "can't wait" orders are being fulfilled on-site until at least April 30. Shipping continues as normal. Please contact us for more information.
(877) 775-7705 ~ Sorry, we're closed. Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
State Supply offer radiator steam traps from several different manufacturers, such as Armstrong and Mepco. Radiator steam traps are found on radiators, convectors, and related equipment in steam heating systems. Usually operating under 15 psi of steam or less, radiator traps often make up the largest population of steam traps in your low-pressure steam heating system. The single operating component within the radiator trap is a thermostatic element which opens to let condensed steam out and closes to prevent steam from going beyond its point of use. Radiator traps are available in several different connection sizes and operating pressures.
Find manufacturer-specific product information
Armstrong model TS-2 radiator trap with a 1/2" NPT connection and angle pattern for service up to 50 psi. The TS-2 has a balanced pressure thermostatic element with a high quality multiple-convolution bellows that make it ideal for draining equipment such as steam radiators and convectors, small heat exchangers, unit heaters, and steam air vents. The TS-2 features a cast bronze body and a stainless steel seat.
Armstrong model TS-2 radiator trap with a 3/4" NPT connection and angle pattern for service up to 50 psi. The TS-2 has a balanced pressure thermostatic element with a high quality multiple-convolution bellows that make it ideal for draining equipment such as steam radiators and convectors, small heat exchangers, unit heaters, and steam air vents. The TS-2 features a cast bronze body and a stainless steel seat.
Armstrong model TS-2 radiator trap with a 1/2" NPT connection and straight pattern for service up to 50 psi. The TS-2 has a balanced pressure thermostatic element with a high quality multiple-convolution bellows that make it ideal for draining equipment such as steam radiators and convectors, small heat exchangers, unit heaters, and steam air vents. The TS-2 features a cast bronze body and a stainless steel seat.
Armstrong model TS-2 radiator trap with a 3/4" NPT connection and straight pattern for service up to 50 psi. The TS-2 has a balanced pressure thermostatic element with a high quality multiple-convolution bellows that make it ideal for draining equipment such as steam radiators and convectors, small heat exchangers, unit heaters, and steam air vents. The TS-2 features a cast bronze body and a stainless steel seat.
Armstrong model TS-3 radiator trap with a 1" NPT connection and angle pattern for service up to 65 psi. The TS-3 is a heavy duty, wafer type trap for the drainage of all types of steam radiators and convectors. Its wafer design is ideal for systems prone to water hammer. The TS-3 is repairable in-line and features an all-stainless steel wafer element.
Armstrong model TS-3 radiator trap with a 1/2" NPT connection and straight pattern for service up to 65 psi. The TS-3 is a heavy duty, wafer type trap for the drainage of all types of steam radiators and convectors. Its wafer design is ideal for systems prone to water hammer. The TS-3 is repairable in-line and features an all-stainless steel wafer element.
Armstrong model TS-3 radiator trap with a 3/4" NPT connection and straight pattern for service up to 65 psi. The TS-3 is a heavy duty, wafer type trap for the drainage of all types of steam radiators and convectors. Its wafer design is ideal for systems prone to water hammer. The TS-3 is repairable in-line and features an all-stainless steel wafer element.
Armstrong model TS-3 radiator trap with a 1" NPT connection and straight pattern for service up to 65 psi. The TS-3 is a heavy duty, wafer type trap for the drainage of all types of steam radiators and convectors. Its wafer design is ideal for systems prone to water hammer. The TS-3 is repairable in-line and features an all-stainless steel wafer element.
Hercules thermostatic radiator steam super trap, model 122A-ST, with a 1/2" trap connection in an angle pattern. This trap features an enhanced, stainless steel screen protected, 7-coil bellows thermostat bellows for longer lasting operation. The 122A-ST is cast bronze and has a 25 psi maximum operating pressure.
Hercules thermostatic radiator steam super trap, model 122S-ST, with a 1/2" trap connection in a straight pattern. This trap features a enhanced, stainless steel screen protected, 7-coil bellows thermostat bellows. The 122S-ST is cast bronze and has a 25 psi maximum operating pressure.
Hercules thermostatic radiator steam super trap, model 134A-ST, with a 1/2" trap connection in an angle pattern. This trap features a enhanced, stainless steel screen protected, 7-coil bellows thermostat bellows. The 134A-ST is cast bronze and has a 25 psi maximum operating pressure.
Hercules thermostatic radiator steam super trap, model 134S-ST, with a 3/4" trap connection in a straight pattern. This trap features a enhanced, stainless steel screen protected, 7-coil bellows thermostat bellows. The 134S-ST is cast bronze and has a 25 psi maximum operating pressure.
Hercules thermostatic radiator steam super trap, model 147A-ST, with a 1" trap connection in an angle pattern. This trap features a enhanced, stainless steel screen protected, 7-coil bellows thermostat bellows. The 147A-ST is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1G, with a 1/2" trap connection in an angle pattern. The 1G is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1GLHC, with a 1/2" trap connection in a left-hand pattern. The 1GLHC is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1GRHC, with a 1/2" trap connection in a right-hand pattern. The 1GRHC is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1VG, with a 1/2" trap connection in a vertical pattern. The 1VG is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1GHSW, with a 1/2" trap connection in a straight pattern. The 1GHSW is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1MG, with a 1/2" trap connection in an angle pattern. The 1MG is cast bronze and has a 65 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 1MG, with a 1/2" trap connection in a straight pattern. The 1MG is cast bronze and has a 65 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 3GH, with a 3/4" trap connection in an angle pattern. The 3GH is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 3MG, with a 3/4" trap connection in an angle pattern. The 3MG is cast bronze and has a 65 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 3MGH, with a 3/4" trap connection in a straight pattern. The 3MGH is cast bronze and has a 65 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 3GHSW, with a 3/4" trap connection in a straight pattern. The 3GHSW is cast bronze and has a 25 psi maximum operating pressure.
Illinois thermostatic radiator steam trap, model 5MGH, with a 1" trap connection in an angle pattern. The 5MGH is cast bronze and has a 25 psi maximum operating pressure.
Marsh thermostatic radiator steam trap, model 1N, with a 1/2" trap connection in an angle pattern. The 1N is cast bronze and has a 25 psi maximum operating pressure.
Marsh thermostatic radiator steam trap, model 1N, with a 1/2" trap connection in a straight pattern. The 1N is cast bronze and has a 25 psi maximum operating pressure.
Marsh thermostatic radiator steam trap, model 1N, with a 1/2" trap connection in a vertical pattern. The 1N is cast bronze and has a 25 psi maximum operating pressure.
Marsh thermostatic radiator steam trap, model 1N, with a 1/2" trap connection in a left-hand pattern. The 1N is cast bronze and has a 25 psi maximum operating pressure.
Marsh thermostatic radiator steam trap, model 1N, with a 1/2" trap connection in a right-hand pattern. The 1N is cast bronze and has a 25 psi maximum operating pressure.
Marsh thermostatic radiator steam trap, model 2-4, with a 3/4" trap connection in an angle pattern. The 2-4 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 30, with a 1/2" trap connection in an angle pattern. The 30 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 34, with a 1/2" trap connection in an angle pattern. The 34 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 34, with a 1/2" trap connection in a straight pattern. The 34 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 38, with a 1/2" trap connection in an angle pattern. The 38 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 48, with a 1/2" trap connection in an angle pattern. The 48 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 52, with a 1/2" trap connection in an angle pattern. The 52 is cast bronze and has a 50 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 6-B, with a 1/2" trap connection in an angle pattern. The 6-B is cast bronze and has a 125 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 34, with a 3/4" trap connection in a straight pattern. The 34 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 38, with a 3/4" trap connection in a straight pattern. The 38 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 48, with a 3/4" trap connection in a straight pattern. The 48 is cast bronze and has a 25 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 52, with a 3/4" trap connection in a straight pattern. The 52 is cast bronze and has a 50 psi maximum operating pressure.
Monash thermostatic radiator steam trap, model 6-B, with a 3/4" trap connection in an angle pattern. The 6-B is cast bronze and has a 125 psi maximum operating pressure.
Spirax-Sarco thermostatic radiator steam trap, model RTA-125, with a 1/2" trap connection in an angle pattern. The RTA-125 is cast bronze and has a 125 psi maximum operating pressure.
Sterling thermostatic radiator steam trap, model 750-A, with a 1/2" trap connection in an angle pattern. The 750-A is cast bronze and has a 25 psi maximum operating pressure.
Sterling thermostatic radiator steam trap, model 750-A, with a 1/2" trap connection in an angle pattern and stainless steel seat. The 750-A is cast bronze and has a 25 psi maximum operating pressure.
Sterling thermostatic radiator steam trap, model 770-L, with a 1/2" trap connection in a left-hand pattern. The 770-L is cast bronze and has a 25 psi maximum operating pressure.
Sterling thermostatic radiator steam trap, model 770-R, with a 1/2" trap connection in a right-hand pattern. The 770-R is cast bronze and has a 25 psi maximum operating pressure.
Sterling thermostatic radiator steam trap, model 770-S, with a 1/2" trap connection in a straight pattern. The 770-S is cast bronze and has a 25 psi maximum operating pressure.
Sterling thermostatic radiator steam trap, model 780-V, with a 1/2" trap connection in a straight pattern. The 780-V is cast bronze and has a 25 psi maximum operating pressure.