
Conbraco 41-060-01 - 1/8" NPT Brass Air Cock
Conbraco satin brass 1/8" IPM air cock with tee handle tested to 80 psi air and 500°F.
ATTN: Small pack shipments are experiencing 2-3 day carrier delays. If you choose to ship LTL, choose priority for more reliable delivery times.
(877) 775-7705 ~ We're currently open! Hours
Not sure if you have a State Supply account? Try to reset your password.
You don't need an account to purchase from us, but without an account you will miss out on a few important features:
Find manufacturer-specific product information
Conbraco satin brass 1/8" IPM air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double female 1/8" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass male by female 1/8" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double male 1/8" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass 1/4" IPM air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double female 1/4" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass male by female 1/4" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double male 1/4" NPT air cock with lever handle tested to 80 psi air and 500°F.
Conbraco satin brass double male 1/4" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double female 3/8" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass male by female 3/8" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double male 3/8" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco satin brass double male 1/2" NPT air cock with tee handle tested to 80 psi air and 500°F.
Conbraco chain operated 1/2" IPM gauge cock, rated to 250 psi, which uses a spring loaded lever for use on water columns beyond reach of the floor.
Conbraco chain operated 3/4" IPM gauge cock, rated to 250 psi, which uses a spring loaded lever for use on water columns beyond reach of the floor.
Conbraco polished brass wheel handle 3/8" IPM compression gauge cock, rated to 250 psi, with a soft metal seat and a stuffing box.
Conbraco polished brass wheel handle 1/2" IPM compression gauge cock, rated to 250 psi, with a soft metal seat and a stuffing box.
Conbraco polished brass wheel handle 3/4" IPM compression gauge cock, rated to 250 psi, with a soft metal seat and a stuffing box.
Watts number BP-30 by-pass relief, angle-pattern valve with a 1/2" NPT male by female connection. This valve features an adjustable range of 10-50 psi, a maximum temperature of 180°F, and a maximum pressure of 250 psi. This diaphragm actuated valve is designed to regulate liquid pressure supplied by a positive pressure pump. It protects equipment by opening at a desired setting and allowing excess volume to return to the source.
Watts number N36 1/2" IPF vacuum relief valve. This valve features a maximum water pressure of 200 psi, maximum temperature of 250°F, and opens at less than 1/2" vacuum. It is also suitable for steam service to 15 psi and has a venting capacity of 13.5 CFM. Vacuum relief valves automatically vent a system if a vacuum occurs and will automatically vent a closed system to atmosphere when a vacuum is created preventing conditions where water could be siphoned from the system.
Watts number N36 3/4" IPF vacuum relief valve. This valve features a maximum water pressure of 200 psi, maximum temperature of 250°F, and opens at less than 1/2" vacuum. It is also suitable for steam service to 15 psi and has a venting capacity of 20 CFM. Vacuum relief valves automatically vent a system if a vacuum occurs and will automatically vent a closed system to atmosphere when a vacuum is created preventing conditions where water could be siphoned from the system.
Bell & Gossett model 3301-30 cast iron hot water relief valve in an angle pattern with a 1-1/2" inlet and a 2" outlet. This valve can be set at 30 psi and has a 3,300,000 BTU capacity.
Bell & Gossett model 3301-36 cast iron hot water relief valve in an angle pattern with a 1-1/2" inlet and a 2" outlet. This valve can be set at 36 psi and has a 3,800,000 BTU capacity.
Bell & Gossett model 3301-45 cast iron hot water relief valve in an angle pattern with a 1-1/2" inlet and a 2" outlet. This valve can be set at 45 psi and has a 4,500,000 BTU capacity.
Bell & Gossett model 3301-50 cast iron hot water relief valve in an angle pattern with a 1-1/2" inlet and a 2" outlet. This valve can be set at 50 psi and has a 4,900,000 BTU capacity.
Bell & Gossett model 4100-30 cast iron hot water relief valve in an angle pattern with a 2" inlet and a 2" outlet. This valve can be set at 30 psi and has a 4,100,000 BTU capacity.
Bell & Gossett model 4100-36 cast iron hot water relief valve in an angle pattern with a 2" inlet and a 2" outlet. This valve can be set at 36 psi and has a 4,600,000 BTU capacity.
Bell & Gossett model 4100-45 cast iron hot water relief valve in an angle pattern with a 2" inlet and a 2" outlet. This valve can be set at 45 psi and has a 5,515,000 BTU capacity.
Bell & Gossett model 4100-50 cast iron hot water relief valve in an angle pattern with a 2" inlet and a 2" outlet. This valve can be set at 50 psi and has a 5,990,000 BTU capacity.
Bell & Gossett model 790-30 bronze hot water relief valve in an angle pattern with a 3/4" inlet and a 3/4" outlet. This valve can be set at 30 psi and has a 790,000 BTU capacity.
Bell & Gossett model 790-45 bronze hot water relief valve in an angle pattern with a 3/4" inlet and a 3/4" outlet. This valve can be set at 45 psi and has a 1,065,000 BTU capacity.
Bell & Gossett model 790-50 bronze hot water relief valve in an angle pattern with a 3/4" inlet and a 3/4" outlet. This valve can be set at 50 psi and has a 1,160,000 BTU capacity.
Bell & Gossett model 790-75 bronze hot water relief valve in an angle pattern with a 3/4" inlet and a 3/4" outlet. This valve can be set at 75 psi and has a 1,615,000 BTU capacity.
Bell & Gossett model 790-100 bronze hot water relief valve in an angle pattern with a 3/4" inlet and a 3/4" outlet. This valve can be set at 100 psi and has a 2,075,000 BTU capacity.
Bell & Gossett model 790-125 bronze hot water relief valve in an angle pattern with a 3/4" inlet and a 3/4" outlet. This valve can be set at 125 psi.
Bell & Gossett model 1170-30 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 30 psi and has a 1,170,000 BTU capacity.
Bell & Gossett model 1170-36 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 36 psi and has a 1,330,000 BTU capacity.
Bell & Gossett model 1170-45 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 45 psi and has a 1,575,000 BTU capacity.
Bell & Gossett model 1170-50 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 50 psi and has a 1,710,000 BTU capacity.
Bell & Gossett model 1170-75 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 75 psi and has a 2,385,000 BTU capacity.
Bell & Gossett model 1170-100 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 100 psi and has a 3,060,000 BTU capacity.
Bell & Gossett model 1170-125 bronze hot water relief valve in an angle pattern with a 1" inlet and a 1" outlet. This valve can be set at 125 psi and has a 3,735,000 BTU capacity.
Conbraco low pressure, high capacity steam relief valve with a 2" male x female NPT connection with one piece bronze body construction for commercial and industrial boilers. This valve is set at 15 psi, 3150 pounds per hour, and is national board certified to 15 psi.
Conbraco low pressure, high capacity steam relief valve with a 2-1/2" male x female NPT connection with one piece bronze body construction for commercial and industrial boilers. This valve is set at 15 psi, 4676 pounds per hour, and is national board certified to 15 psi.
Conbraco low pressure, high capacity steam relief valve with a 3" male x female NPT connection with one piece bronze body construction for commercial and industrial boilers. This valve is set at 15 psi, 6843 pounds per hour, and is national board certified to 15 psi.
Kunkle bronze steam relief valve with a 1/2" NPT male inlet x 3/4" NPT female side outlet. These bronze body and brass trim valves offer side outlet and full nozzle design with steam pressures to 250 psi and 406°F. It is necessary to specify the set pressure when ordering.
Kunkle bronze steam relief valve with a 3/4" NPT male inlet x 1" NPT female side outlet. These bronze body and brass trim valves offer side outlet and full nozzle design with steam pressures to 250 psi and 406°F. It is necessary to specify the set pressure when ordering.
Kunkle bronze steam relief valve with a 1" NPT male inlet x 1-1/4" NPT female side outlet. These bronze body and brass trim valves offer side outlet and full nozzle design with steam pressures to 250 psi and 406°F. It is necessary to specify the set pressure when ordering.
Kunkle bronze steam relief valve with a 1-1/4" NPT male inlet x 1-1/2" NPT female side outlet. These bronze body and brass trim valves offer side outlet and full nozzle design with steam pressures to 250 psi and 406°F. It is necessary to specify the set pressure when ordering.
Kunkle bronze steam relief valve with a 1-1/2" NPT male inlet x 2" NPT female side outlet. These bronze body and brass trim valves offer side outlet and full nozzle design with steam pressures to 250 psi and 406°F. It is necessary to specify the set pressure when ordering.
Page 1 of 6